wickiewicked240z

Should i go with original taillights the taillights that came with the car are cracked and they are not looking good .. or should i just go with something different........? i have a 71 240z ...

i'll take a pair of those:icon44::icon44:

Im going to spray it with some high fill primer

another great video.......... thats alot of lube..

finish some the body work

No, California.... Inland Empire san bernardino area

First time doing body work I got a gallon of Evercoat Rage Xtreme just putting thin coats of body filler and block sanding .It needs to be sanded just filling up where the guide coat stayd on... THE CUSTOM SEAT JUST NEEDS A LITTLE PADDING ON THE SIDES.....

the place i took it too does alot of cars specially classic cars....they had an article in LOWRIDER MAGAZINE you could probably see it in www.lowridermagazine.com the shop is called Blasting specialties....http://www.lowridermagazine.com/tech/0604lrm_rust_removal_media_blasting/

I dunno they said it was some kind of media it was not sand cause it was like red color.. very fine particles media blast was $1,380 and etching primer and then i spray PPG Epoxy primer primer was about $200

get your self $60 dollars go to the sheet metal supplier get your self a 4X10 20 gauge sheet metal i got some for my 240z restoration and im done and still get a lot left over

should i do the body filler work with the doors and hatch mounted on the zhell or separate........

I used ppg epoxy primer....

going to post pic on my 240z restoration thread

402 hardner and it was really hot so that didn't help at all 100*degrees but i did it in side the garage with fan and door open

This is my first time paint im not using a HVLP gun. I sprayed the PPG epoxy primer i got orange peel. Do i sanded until smooth or do i wait after i do my body filler work..or can i just leave it like that, im planning on spraying it with some filler primer after im done with my body filler work.. one more thing can i spray more epoxy primer on the car if the primer is already dried or do i need to sand to get it to stick.... do i sand the epoxy when im ready to spray the primer filler?

this is what i picked up today at harbor freight 17" block sander and 11" block sander and some other stuff... some seam sealer..............

picked up my fenders from body shop $300 dollars for both to fix rust and dents. Will post pics later

I have installed 2 system on 2 cars im not an expert but In my 90 300zx i face the sub towars the back. I had a 93 240sx coupe i had the sub facing the back seat because if i was to face it to the back it would rattle because of the air trying to escape........and in the hatch the bass hits harder

these are 2 pictures of the door i'ts not bigger than 1/4 its less

Heres some pictures of the interior painted with a brush and RUSTBULLET.

I have painted the interior with RUST BULLET i will post pictures tomorrow...