AgentZ

http://www.veggievan.org for your Bio desiel fuel info Ethanol is used in race cars cause it burns cooler (i think)!

Screw em. I have had it up to my *** with employers who are all high and mighty. Honestly in a 4 person company her leaving would most likley cost them a wee bit

Not sure but does this mean it does? 700-R4 - The 700-R4 is now called the 4L60, and computer controlled 700-R4s are now called 4L60-E (the "E" stands for electronic). The 700R-4 can and has been used for RX-7 conversions, but expect to do some minor modifications to the trans. tunnel. The 700R-4 is quite a bit heavier than the 2004-R and has more parasitic losses. An engine computer is not required for proper operation of the pre-'92 transmissions, but minor re-wiring is required for operation of the lock-up converter. The 4L60-E REQUIRES the proper ECM/engine combination to function correctly. Output shaft spline is the same as the T-350 and 200-4R, but the overall length is longer. The 700-R4 from a 60 degree V-6 will NOT fit a 90 degree V-6 or any V-8, as the bellhousing bolt pattern is different. The Corvette 700-R4 does not have provision for a conventional transmission mount. From http://members.tripod.com/~grannys/rx7engineselectioninfo.html

Hey there, I love being on this side of the world. I found a good LS1 and T56 combo, wiring loom and computer included all for the grand total of $12,000 NZ dollar (and no that aint a typo!). I reckon it would be cheaper to buy it in the States and import it over! Being Broke sucks!

These came with the car, I sorta like them but does anyone know anything about them?

Just bumping it up

I got rust, nice peices in great places! On the 280zx where the windscreen pillar comes down to the fender ares on the pinch weld, its there! What would be the best way to remove this? Divers Side Rust Passengers Side Rust Any advice would be great! I would love to be able to handle all this myself! Cheers!

Stangers have the best candy!

$400 is the starting bid, $895 is the buy now! I am seriously thinking of bowing out on this one!

I would love to be able to do that. But there is also freight to consider, I am in New Zealand (otherside of the world!!) I wonder how much freight would cost!

I have a line on a 350 but it is a little used. from this auction here http://www.trademe.co.nz/Trade-Me-Motors/Car-parts-accessories/Chevrolet/auction-36800497.htm The seller is in the same city as me so I went to see it. He says it is a core return engine. Is this worth it at all? Or should I just save up for a crate? Cheers!

Slight Hijack but what is the best way to cut rust out? Sawzall or cut off wheel? Just wondering looknig to buy some new tools. Cheers!

Hey there, I have a Z31 that needs a new headlight switch, they are no longer avialble here and I was thinking about getting a US One. Which side of the steering wheel is this on and anyone know where I can get one? Cheers!

Isnt there one of those on the orig. gone in 60 seconds?

That Lambo has been on there for a very long time now!

So time to buy a Mig and an RB is it? I hate body work but I guess I gotta learn at some stage! Cheers Guys

Hey there, I recking this is signs of cracking or flexing. or is it just rust? http://album.hybridz.org/data/500/8346bottomdoor-med.jpg http://album.hybridz.org/data/500/8346doorframe-med.jpg

2.5 or 3 inch all the way through! I am really thinking this is a sign from the gods to go RB

Hey there, Seems my 280 is being a total cow and pushing me to go a different route with the engine. it is a l28 with triples, drove FINE last night, but thismorning was missing and then over heating like crazy, thought it might have been a wee fuel problem, so I filled up and it didnt make a change, havent had a chance for a tear down to look at the plugs but i think it is an ignition problem. Cheers in advance!

Hey those look good, Anyone know if they do them for 280ZX? ' Cheers!

Was about to say something similiar about the 3X, good fun and looks nice but when not tuned it is a total cow on the street! And being that Link ECUs are made here in NZ might be a good projectand support thew local developers, hows that for an idea?