Jump to content
HybridZ

blackwidow

Members
  • Posts

    62
  • Joined

  • Last visited

About blackwidow

  • Birthday 01/03/1983

Profile Information

  • Gender
    Not Telling
  • Location
    Dothan, Al

blackwidow's Achievements

Newbie

Newbie (1/14)

10

Reputation

  1. If you are referring to the 20 psi quoted earlier, it should raise to what's needed when it has the pressure regulator in line.
  2. Hey guys I just got a '97 Ford Expedition XLT AWD/4x4. It has 217,000 on the od and a dent on lower passenger side. Power everything, cloth interior, cruise, cd player. A/c and heater work great and has hook ups for third row sating but I don't have the bench for the third row. Has a tow hitch on the rear, the model for electric brakes, and seems to sit higher than a normal explorer. It's basically a good work What I am looking for is a 240z in original orange with a clean body very minimal rust. Will do trades plus cash or trades and you give me some cash depending on condition of your Z. Just hit me up with what you got. I am in lower Alabama and don't mind traveling. Have clean and clear title in hand. You can hit me up on here, my e-mail widomkr94t@yahoo.com, or text/call me at 334-596-6699...... Thanks
  3. Hello there, I have a 1989 Supra with a Chevy 350 motor with a th400 automatic transmission installed. The car is in great condition and runs excellently. The 350 is a TBI motor with clean oil and custom intake system. The transmission is a TH400 auto with a bump shifter, but the original clutch setup is still in the car if you wish to switch back to an manual tranny. The radiator is an aftermarket 3 row aluminum unit. I have had no problems with the car over heating with this installed. The interior is in excellent condition with the exception of the dash is cracked. The car was painted blue at some point and had the moldings removed and the filler is starting to show so it needs a little work on the outside. Has a custom exhaust that comes out the back through a flowmaster exhaust. The exhaust was professionally done and makes the car sound great. There are a couple things that don't work like the speedo, a/c and heater. The speedo needs and adapter linkage and the A/C needs a compressor and custom lines. The heater can be made to work no problem with a outlet on the water pump. The car has a nice pioneer CD player in it that works perfectly. Overall the car is in great shape and all the hard work has already been done with the motor swap, and it runs and drives great. I would like $3500 or trade possibly. Throw me some offers. If you would like to set up a time to look at the car or have any other questions you can contact me through the e-mail on here, or you can call or message me at 1-334-5 nine 6-six 6 nine 9 Thanks
  4. Very aware the tranny is gonna have to come out rodger, but I am not sure when I would be able to get to it and was hoping to have the parts ready when I took it out so I could get it on the lift and back down the same day. Was just looking for some back-up since it's been a while since I have had to diagnose anything really. I stoped being a mechanic years ago in search of cleaner/greener pastures if you will. At any rate thanks for the replys and suggestions.
  5. Ok I just wanted some quick back-up. I just bought a 85 300zx turbo. The guy told me that it won't shift while the car is running, and that if you do grind it into gear that it will konk out. Basically like the clutch will not disengage properly. So first things in my head are slave/master cylinder, or clutch. So I get under the car and the slave cylinder seems to be moving the fork the proper distance, plus when I shine a flashlight in the hole where the fork is I can see it moving and depressing the pressure plate tongs/springs. There is also what looks to be fiberglass shavings in there( which I'm guessing is from a worn out clutch) Now then I'm kinda just asking can a clutch wear out so bad that it won't disengage? Or is there anything that will cause this in the tranny? So here is the rundown Will shift when car is off. Won't shift when car is running. Hydraulic's all seem to be working fine. Clutch fork moves freely and presses down on pressure plate. I just don't want to buy clutch parts ahead of time only to not need them. Thanks
  6. Have you seen mine? Will need a little work, but would make a great daily. http://forums.hybridz.org/index.php/topic/96591-alabama-1977-280z-needs-work-tons-of-extra-parts-1750/
  7. I have a great condition P90a head and probably 3 or 4 different cams to choose from including one turbo cam. If you are interested I will take $150 plus shipping for the head and the cam of your choice. Currently the cam towers are off and will need to be reinstalled with the cam. I can probably ship it greyhound to save on shipping. Just let me know. Thanks
  8. I either have a 3.3 or a 3.6 longnose R200. It's been recenly gone through and cleaned with a new cover gasket put on. I'll take $75 plus shipping, which will probably have to be greyhound or something to keep costs down. Let me know if you want me to check for you. Thanks
  9. Hello,

     

    I was doing some research from previous posts and thought that you might be able to help me out.

     

    I purchased a manifold/balance tube/fuel line from "steveosupremeo". Oddly enough, he has not logged back onto the server since feb. 7 (a day after the payment cleared). I have sent him an email, left him a message on his user page, and sent him PM. I have not gotten a response.

     

    Do you still talk to him? I would like to get these parts soon. It shouldn't take more than 2 days for shipping (I have not gotten a tracking number yet either). It is going on 2 weeks now.

     

    I either need him to contact me (an email will be fine) or refund my money.

     

    Thank you for any assistance you provide in advance.

     

    Derek

  10. No offense, but you should probably start your own thread with these questions so as not to take over the op's thread.
  11. I don't know how you plan to use your car, but I would want a lower 5th for the rear you just got.
  12. If it was me I would go from the battery.
  13. I just saw that page not to long ago in a search. from what I read if you guys could find some S15 output shafts or equivilent you could use the mm adapters cause i believe they are 6 bolts.
×
×
  • Create New...