JPN_Garage

No, it was my 2013 Accord

Been busy this week, my daily driver got stolen monday night so

When you first start the car it starts normal its only when you shut it down and try to restart it again that is goes into limp mode, That's why I thought it was the throttle body at first but after replacing it the same issue was there.

Thanks for this, I have disconnected the accelerator pedal, ecu and throttle body various times to route wires so this might be it.

Yes sir I am, Ialso had to send the pedal to Z fever to modify.

Well I am almost done with my 74 260Z VQ35de swap and I have hit a little bump that is killing me. I went with a 32,000 mile 2004 VQ35de motor and its 6 speed tranny with motor harness portion, Custom fead and return fuel system with 6an nylon braided hoses, walbro 255 fuel pump and aeromotive fpr to hold 55lbs fuel pressure, custom motor mounts and tranny mount by Cam Fabrications For the programming portion I went with the Z fever kit witch modifies your stock 350Z harness and modifies the ecu to run on a non 350Z vehicle, it also tunes it with uprev. The wiring has already been installed and the car has been started with the VQ motor but here is the issue. The car starts immediately and maintains its rmp's and everything runs smooth but once you shut down the car and start it again the car only accelerates to 1500 rpm, I already replaced the throttle body for a new one and this did not fix the issue, I also checked for any codes and there were non. To fix the issue I have to disconnect the battery and wait for 30 min to 1 hour for the car to work normal again. What can this issue be? Any help would be appreciated.

Message sent

The price and more pictures are on the website already, the digital rendering should be done this week. http://www.jpngarage.com/D-Brinkworth-S30-S31-Datsun-flares-full-set-D-Brinkworth-Flares.htm

Thanks for your input, The flares shown are a combination of foam, fiberglass and body filler witch was used to mold on the car for perfect fitment and look, after these the molds will be created and all imperfections will be fixed.

Thanks, These pictures were sent to me directly from the designer till the official rendering comes through. You hit it on the dot, these flares are meant to ride low like the RB kits.

At JPN Garage we are proud to bring the Datsun community new stuff all the time but this time its flares, These flares were created for JPN Garage by Mr. Bill Brinkworth These flares were hand built and molded on the vehicle so fitment and quality is amazing. The first 15 sets will be sold for $650 + Shipping after that price will go up to 700 + shipping http://www.jpngarage.com/D-Brinkworth-S30-S31-Datsun-flares-D-Brinkworth-Flares.htm Molds will be finished soon so please allow 4 to 6 weeks for shipping.

The wing is the same as the victory but a little taller.

Pricing and pics should be out in the next couple of days. The quality and fitment of these is amazing.

This is what he emailed me a couple of days ago. Datsun Z Parts Nov 15 (3 days ago) to me Stopping all orders until i find another way. heres why this is why a note from Mildred Vodhanel "I originally paid for this fiberglass hatch on October 3rd. I was told about 4 weeks fabrication time and I should receive my hatch towards the end of October. It is now November 13th ; in order to protect myself I must file this dispute before the Paypal set deadline of 45 days after initial purchase Mildred Vodhanel I shipped the hatch already and he got his money back and a free hatch i cant have this happen again, I work 7 days a week to get everything out to everybody. im not Walmart you cant pick it up on the shelf i have to make it James

We are focusing on styling and fitment at this time, for the past 15 years its been the same over and over for our Datsuns so were bringing new stuff out

What are you talking about Mikelly?

The kit will be all 4 fender flares. (no price yet till molds are done) We will also be making a new 3 piece spoiler with a little more angle and height. The hood is just a drawing but we are considering making one later on.

More pics soon, we are creating the molds to finalize the product.

The time has come. The molds and first kits are finally done so its time to start shipping. These flares are designed by Bill Brinkworth for JPN Garage. Its like no kit the S30 community has seen in years, the flares were hand crafted and molded on the vehicle for a perfect fitment and ease of installation. The fiberglass materials used are the best in the market. The front will add 3.5 inches to the body and the rears 3.75 inches. We will be selling the full set or the rears separate. * Kit does not include rear spoiler * Prices and info are on this link. http://www.jpngarage.com/D-Brinkworth-S30-S31-Datsun-flares-full-set-D-Brinkworth-Flares.htm

At JPN Garage we have been ordering and studying random aero S30 fiberglass parts from other stores to compare quality, fitment and cost. Its been clear to us that these items lack in quality and fitment so were doing something about this. Starting Dec 2014 we will start making our own S30 fiberglass aero parts including rear spoilers, air dams, headlight buckets, bumper deletes, side skirts and others with the best fiberglass quality and fitment possible at the best prices. We will also be coming up with new designs when it comes to rear spoilers and air dams and listen to customers when it comes to a new design. We have hired a master fiberglass tech and we will be making each fiberglass part out of scratch, molding it and designing it on the vehicle for best fitment. If you have any idea on new aero parts don't be shy and let us know about it. Thanks. JPN Garage INC www.jpngarage.com (407) 600-7911

I ordered parts about 2 month ago and nothing yet

Im offering them soon

Thanks JohnC. Can somebody help with the off the ground mesurement

Guys I need some help with the OEM ride height of the 240Z/280Z. What I need is a front and rear ride height on the ground and off the ground from center of hub to center lip of fender. Any help would be greatly appreciated. Here some pics to illustrate what I need.

They do fit with 195/50/15 in the rear.