DevilZX

What would I use if it came time to replace rotors and/or pads? Is there a part number or some kind equivalent parts from another company?

Sorry I don't have any contribution to helping you out with power but I just came to say I like your car! Saw it on the DATSMO fb page.

A buddy of mine is just getting into video/photography. We just built a cheap-o slider to use in video making and he quick put this together with the first test shoot. Hope you enjoy!

Or you could try here. My link

I'm using Amsoil Manual Transmission 75w-90 in mine. Works fantastic! The main thing I found out about the T5 is to NOT use a GL-5 rated fluid as it has properties that are bad for "yellow metals" (brass synchros). GL-4 is what you are looking for. I found this out the hard way once...

As far as I know, the one I run is the same as the MSA Classic.

I used the supplied bolts. I had already attached the smaller BRE style spoiler before using the bolts so it seemed natural to use them on this one. They lined right up.

I have to chime in here. I have the same spoiler and the same fitment issue. The edge seems to curve on one side (I think the left on mine too). It also seems to warp left to right on the top edge. It has a rough 45* angle rake on the left side but gains about 5* on the right (just guessing numbers but it leans back further on the right side). Overall, I like the spoiler but there do seem to be some manufacturing flaws. I have no experience working with FG so I chose to leave it as is. Last image shows the weird twist/rake change I was talking about the best.

I run the staggered setup like CaptainJoe is talking about. 9" in front, 9.5" in rear. 245/40r17 front and 255/40r17 rear. I swapped front and rear for a week and had no issues with rubbing. I have the Tokico HP spring/strut combo for suspension. When I put the 9.5" in front there wasn't much clearance between the rim and the spring perch. Somewhere around 1/8" or less. I just rolled the fenders to get them to fit. I think that the 9.5" in front looks better than the staggered setup because it brings the wheel closer to the edge of the fender to match with the rear. If I did it again, I would do 9.5" on all 4.

I also have it done except I chose to only tint the early style, amber turn signal portions.

I'm in also if the price and fit is right! Nice find!

Looking for the YELLOW top NA supra injectors. Need all 6. I have 6 BLACK top turbo supra injectors and would be willing to make a trade/deal. Thanks!

I found one. Thank you though!

Well, after a Land Rover, the ditch at 60mph, numerous curbs and driveways, and finally this concrete platform corner.. Its about done for. Only a couple solid mounting points left intact and after today there is now a flap torn into it the size of a license plate (which I have affixed there to cover it up). All this adds up to me,to be quite a daunting task, as I know nothing about FG repair. I'm just going to take the easy way out here, I think.

Can anyone tell me if the MSA "classic" is the same as what I'm looking for?

Long story short, I broke my airdam and I need a new one. Its a fiberglass unit. I really would like one of the same because I dont really enjoy the looks of what is available now. Just like this:

Hey! I knew I should have asked you! Haha! I just got all the parts from you installed today! Thanks a million! On to this gas cap. It is unlocked, correct? (just one of those questions I have to ask) If so, I'll take it!

As the title states, I need a gas cap. I have been driving without it for a week and it seems to want to leak out all the time.. ha! Locking WITH a key is preferred but I'll take what is available right away. Thanks!

Looking for a nice bumper cover, preferably color with the black stripe in it. Also looking for the side bumper cover extensions that go to the wheel opening. Also looking for right and left black side molding on the front fenders. Thank you!

Those look nice. Are they rolled and pulled? How much would you want for them shipped to 54026?

Email sent

Where are you located?

Link? Tried looking briefly but couldn't find anything. Or just let me know what you have.

Need two 280zx front fenders. Any color. Rust and dent free please.

Was really clean and on its way to being a great car but SUV's don't make good places to stop. Before: I plan on repairing it. Really only cosmetic damage. I drove it home after the accident. Just need to fix/replace the core support. This is much as frame damage goes. I was only a mile or so from home asI was traveling about 40 mph, following a mid 90's Land Rover with a blinker on for about 100 yards or so while he passed a couple driveway turns. I looked down for literally one second to switch radio stations and as I look up, well, he wasn't moving forward anymore. I sounded my horn quickly and hit the brakes, hard, but still slammed into the trailer hitch at about 30-35 mph. I just saw a flash of red as my hood folded in half blocking my vision nearly completely as I came to a stop. Engine still running I pulled over and popped the hood (amazingly) and proceded to unbolt it and relocate intercooler piping. I was doing this as the officer was talking to me and writing a ticket for inattentive driving. Figures. He wanted to have me tow it away but I was confident enough to get it drivable. I was only a mile or so from home. Nobody was injured in any way.