Jump to content
HybridZ

nazgule6

Members
  • Posts

    65
  • Joined

  • Last visited

Everything posted by nazgule6

  1. Hey guys, I need a r200 3.7 diff let me know if anyone has one in good condition.
  2. kuro your car is sick bro. Can you tell me your tire/ wheel size and are you running spacers etc? Also are you running BMAF flares?
  3. Yes those are the tinted headlights cover from msa, i love em.Tire/wheel combo is 15x9 -12 all around, 265 50 15 back 205 15 15 front. I want more meat in the rear planing to go 295 50 15 soon.
  4. My lady. I finally took it out for a quick photo shoot, more to come.
  5. looking for a pair of front strut housing for 280z. would prefer it to be strip i just want the housing etc...let me know if ya got a pair....
  6. I Need shorter shock ABSORBER for the front of my 280z. Right now I'm running mr2 aw11 shocks in the front, but i need shorter shocks....my question is does anyone know if the Tokico HTS AE86 cartridge short stroke are shorter than the mr2 aw11? thanks
  7. Hey dangerboy was wondering if you still got the rear strut mounts??? If you do I'll take them?? Ship to Fresno California let me know thanks
  8. I see thanks guys.....I got a v8 swap using 250lbs front and rear .. I'm hopping the car would be stiff enough so that It won't hit, because taking everything back apart is going to be a pain in the ***
  9. Hey guys quick question, im doing my coilover swap for my 280z and was wondering if you have to install bumpstops..?? thanks need to know asap...using ttt coilover kit
  10. cockerstar, i notice your not using any bumpstops? Are they required for coilover conversions?? i just finised my coilover conversion for my 280z forgot the bumpstops??
  11. wow long240project that is "CHERRY" very nice very nice
  12. I'M super intrested, let me know if you have any other rims. Can you check if you got anything from 16x9 to like 15x9?? Oh and of course BIG lips and deep offsets. 4X113.3
  13. Alsome looking z Ness, btw that is one sexy looking corrola 8)
  14. Thanks for the suggestions michael appreciate it, i had a feeling it can be those small problems, but like i said I'm not a performance expert so i just wanted to ask.
  15. Thanks for the references, right now im running a edelbrock intake manifold with a edelbrock 600cfm square flange electric choke. I'm not to sure about the engine specs because i did'nt build it, but i know its board .20over 218 duration and a .454" lift cam and these are comp cams, also i believe the heads are still the stock heads just rebuit and clean. I know the motor won't make much hp, but it should shread some tires. The car isint running good at all though, when i the car starts at about 2-2.5 rpm it feels like its lagging and you can feel/hear the car looseing power, but if you keep slowly pressing on the throttle it eventuallys pick up speed, but then again when you slam on the throttle the rpm goes up but the car is very hesitant to go anywhere. Feels like too much air is going to through the exhaust, but im not sure im not performace expert. What do you guys think? oh and it has a rebuilt 700r4
  16. Hey for all the sbc z guys out there, what is a good carburetor that can handle 350 to 400 hp?
  17. Hey those 3.5 speakers looks AWESOME..I may have to do the same thing LOL. Can you tell me what brand those speakers are and how did you mount them in?
  18. Well my car is finally running but I'm having some tranny issues I think. Im running a 350 with a built 700r4 tranny. When I drive it at regular speeds about 30 to 40 it runs fine, but when I start to floor it the car doesnt go anywhere. You can hear the motor push but the tranny doesnt seem to shift. The rpm jumps high untill it gains speed and feels like its not downshift or anything. MY friend told me that its my kickdown cable, but im not sure. I installed it when i finished my build, but i havent adjust it yet? Could there be anything else wrong besides the kickdown cable adjustment?
  19. HMM depends what you have and depends on the condition. Let me know what you got and we can work something out, thanks.
  20. Oops sorry about that i have the hybridz site saved as a bookmark so it doesn't take me to the page where the classifield is at. Totally forgot about it thanks.
  21. I need either a 280zx, manual ,80 to 83, r200 with 3.9 or a 300zx turbo or non turbo r200 3.7 or a 300zx turbo (finned cover) r200 3.7lsd. let me know if anyone got one thanks
  22. hey if rimal310 isint interested in the 87 r200 from the 300zx i would be. Let me know if you still have it I am in need of one. Also what is the gear ratio, should be a 3.7.1 non lsd right?
×
×
  • Create New...