Search the Community
Showing results for tags 'Headlight'.
Found 6 results
-
I have been reading a ton on this site and am ready to post wiring directions on the combo switch for those of you using an EZ Wiring harness. There may be some differences between what model combo switch you have; the one I am working with is off of a 260z and has a 9 pin wiper connector. Some of you may disagree with my wire labeling; well you are wrong; I got it from a guy who restores the combo switches and has done so for over 2 decades. I am going to trust his info and my success with wiring. You will notice a few changes in my chart than in previous posts by other members. Again, I know mine works and has not been altered in any way from the original Datsun wire colors and functions. Let me know if you have any questions. I am running a full LED lighting system around the car. 260z Combo Switch to EZ Wiring Harness.pdf
-
Need a 1973 headlight combo switch, im in nj so can drive or factor that for shipping Mine crapped out, i tried cleaning that little box with the tabs that controls the headlights and tail lights but the issues was with those little caps that cover the springs in the mechanism they were totally messed up and that whole box is kind of dead.... looking for either entire assembly or just the little headlight box with the rocker switches and those 2 springs with the little caps. Attached a pic of the box and the little caps over the springs, let me know what you have! car isnt really entirely drivable with out this! thank you!
-
Hey I need to source some parts for my Z, its a 76 280z , Im looking for a right headlight bucket and a hood without vents, and a grill. I recently wrecked, and need to source these parts to get my Z back to its glorious status.
-
I swapped out my factory lights for new hellas and wired the lights off of relays to eliminate resistance and voltage drop from the factory switch. Quality was mediocre at best compared to modern lights. I decided to try something different and mounted an LED light bar in the radiator opening. I have a g nose car so I only have the lower opening. This is what I installed: https://www.superbrightleds.com/moreinfo/eclipse-series-off-road-led-light-bar/30-off-road-led-light-bar--90w/1489/ I wasn't sure what to expect, but if anything they may be too bright. Night driving on back roads will be fantastic, however I will not be able to use them as driving lights. I was concerned that blocking some of the radiator opening may have impaired the cooling system, but that does not appear to be the case. That being said it was in the 50s when I went for a drive Sunday.
-
Hey guys, im pretty new to the forums, hopefully yall dont bash down too hard on me when i ask about hid setups... ive tried searching through threads and such and have had no luck, not very used to these forum things. anyways i am in the process of buying a z from a guy near me in nc here and have already made a list of things i want to do lol starting with mechanical things to tighten up all the bushings and get all the potential rust areas sanded down primered and coated with bedliner etc.. was wondering what you guys that have hid setups have done? this is going to be a weekend warrior but we all know we like to see the road when we drive at night for sonic meets and cars and coffee meets when the sun hasnt come up yet etc.. i was looking into them and found some plastic housings on ebay i plan to use with some extra sealant around the edges to make sure it doesnt get any extra moisture in them (like every other replacement light housing ive ever bought on ebay does) and since they use h4 bulbs, ill just transplant some hids ive used in my other cars into this one with some fresh h4 bulbs to fit the new housings, on its own relay, and its own straight connection to the battery with the relay attached to the stock headlight switch. has as anyone had any problems of bulb size with hi/low h4 bulbs? as in the bulb behind too long for the housing or not fitting and locking into the housing tightly? everything i do i do down to a tee and dont feel like dealing with returns to these untrustworthy aftermarket ebay companies and hid companies since we all know how easy it is to deal with ebay businesses.... ive also seen the makeshift aftermarket hid "globe" setups like you see in the bmws and new fords (and lots of new cars) and am wondereding if anyone has taken apart any of the headlights and put those globes in there that make the beam nice and flat on the top edge so it doesnt blind oncoming traffic... thanks guys! let me know if you have any suggestions for me!
-
Thanks 1tuffZ and Madkaw! Moderators, please delete. Thanks much.
