ciavola Posted April 16, 2012 Share Posted April 16, 2012 I am looking for the left and right hard brake line( the lines that connect from the T to the rubber lines) Quote Link to comment Share on other sites More sharing options...
NewZed Posted April 16, 2012 Share Posted April 16, 2012 You can get pre-fitted straight lines from a typical auto parts store and bend your own. Measure the length with a piece of string or wire, buy the straight line, and bend it with a tubing bender or build a jig to get the curves right. It's not that hard and you'll have new, unrounded, fittings and a clean, more flexible line than an old used piece. Quote Link to comment Share on other sites More sharing options...
tyler031734 Posted April 16, 2012 Share Posted April 16, 2012 Or you can buy a tubing flair kit and make your own custom lines as well, But you need a little patients for this one. Quote Link to comment Share on other sites More sharing options...
zguy240 Posted April 16, 2012 Share Posted April 16, 2012 I am looking for the left and right hard brake line( the lines that connect from the T to the rubber lines) I am in Glendale CA I have a 71 240z parting out, have those parts 818 298-2549 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.