I Need help identifying a replacement part

[OldAndyAndTheSea]

I'm installing the hyperflex poly bushing kit and while taking my front end apart (1973 240z) I ran into some issues with my LCA inner bushings.

 

Am I correct to assume that these are what people call "Front camber bushings"?

 

Here are a couple pictures of my part. I've researched, and couldn't find a definite answer, as apparently every other person calls it something different.

 

I'd like to replace them, and just wanted to know if I am looking at the right replacement parts.

 

 

 

 

Obviously she's pretty beat, and I've found this kit on eBay, is this what I am looking for? and if not, where can I buy these suckers?

 

http://www.ebay.com/itm/DATSUN-240Z-260Z-280Z-Front-Camber-Bushing-Kit-/360380011706#vi-content

 

Let me know if I'm on the right track, thanks very much for your time. Any input is greatly appreciated.

 

 

Cheers!

[cgsheen]

Yup, that's them. You can probably also find them at MSA ("theZstore.com"), Black Dragon, & etc.

[OldAndyAndTheSea]

Yup, that's them. You can probably also find them at MSA ("theZstore.com"), Black Dragon, & etc.

 

Sweet thanks for confirming!

 

I'll go ahead and order away.

 

Thanks so much for your time.

[NewZed]

Those are adjustable bushings for setting camber. You don't need them unless you want to adjust your camber. Your hyperflex kit probably has a bushing that will get you back to the stock camber setting.

 

http://www.blackdragonauto.com/icatalog/zr/full.aspx?Page=41

[OldAndyAndTheSea]

Those are adjustable bushings for setting camber. You don't need them unless you want to adjust your camber. Your hyperflex kit probably has a bushing that will get you back to the stock camber setting.

 

http://www.blackdragonauto.com/icatalog/zr/full.aspx?Page=41

 

 

Gotcha, and yeah since I am definitely planning out a coil over conversion later this summer, this will work out well.

 

Thanks!