boyracer Posted August 8, 2012 Share Posted August 8, 2012 Doing a Subaru R180 swap for my open R200 and have realized the input flange doesn't just fit on to the R180 like I was expecting it to. The splined part was too large (approx. 27.85mm vs 24.73mm). I need an input flange from an R180 that matches the bolt pattern in this picture, shipped to 98281 or Vancouver, BC. Thanks! Quote Link to comment Share on other sites More sharing options...
BluDestiny Posted August 8, 2012 Share Posted August 8, 2012 the subi diffs have a 27 spline and I think the only half shafts ( things that to into the dif) that work are johnc's at beta motorsports. I know that the 280z's had some 27 spline half shafts, but they may be for an r200 Quote Link to comment Share on other sites More sharing options...
Leon Posted August 8, 2012 Share Posted August 8, 2012 the subi diffs have a 27 spline and I think the only half shafts ( things that to into the dif) that work are johnc's at beta motorsports. I know that the 280z's had some 27 spline half shafts, but they may be for an r200 He needs an input (pinion) flange not the half-shaft axles. Quote Link to comment Share on other sites More sharing options...
boyracer Posted August 8, 2012 Author Share Posted August 8, 2012 the subi diffs have a 27 spline and I think the only half shafts ( things that to into the dif) that work are johnc's at beta motorsports. I know that the 280z's had some 27 spline half shafts, but they may be for an r200 I am using Johnc's side axles for this project but I'm looking for the input flange that connects the driveshaft to the diff. Quote Link to comment Share on other sites More sharing options...
Xnke Posted August 9, 2012 Share Posted August 9, 2012 what year driveshaft are you using? measure the pilot diameter, I may have what you need. Quote Link to comment Share on other sites More sharing options...
z240 Posted August 9, 2012 Share Posted August 9, 2012 I have a couple of parts quality R180's laying around over here in Calgary that I can steal an input flange from for ya. Drop me a note to z240@shaw.ca and we can get you something on the road to you tomorrow. Jim Quote Link to comment Share on other sites More sharing options...
boyracer Posted August 11, 2012 Author Share Posted August 11, 2012 what year driveshaft are you using? measure the pilot diameter, I may have what you need. Thanks Xnke, but it looks like I have one one the way. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.