Mark Clapp Posted January 4, 2014 Author Share Posted January 4, 2014 Hi Wasey, I know I could do quarter glass and most likely the door windows. I will try to get some used glass to make patterns from. If anyone has some they don't need, I'll make them a free set in exchange. I need the dimensions of the hatch glass to see if it will fit in my oven. Thanks, Mark Clapp 816-286-6982 mclapp1@att.net Quote Link to comment Share on other sites More sharing options...
wasey Posted January 5, 2014 Share Posted January 5, 2014 Hi Wasey, I know I could do quarter glass and most likely the door windows. I will try to get some used glass to make patterns from. If anyone has some they don't need, I'll make them a free set in exchange. I need the dimensions of the hatch glass to see if it will fit in my oven. Thanks, Mark Clapp 816-286-6982 mclapp1@att.net If you give me a bit of time (3 weeks or so) I will take you up on this. Thanks, Casey Quote Link to comment Share on other sites More sharing options...
Mark Clapp Posted March 8, 2014 Author Share Posted March 8, 2014 Hi Casey, If you have glass I could borrow for patterns, I'll make what I can as a free set for you. Thanks, Mark Clapp Quote Link to comment Share on other sites More sharing options...
wasey Posted March 9, 2014 Share Posted March 9, 2014 PM sent Mark. Quote Link to comment Share on other sites More sharing options...
FrankieD Posted June 24, 2014 Share Posted June 24, 2014 Well I finally got my headlight covers installed properly. I have to give Mark Clapp credit for a fine job and also a great attitude when I needed help. Check out the attached photos !! I'm very satisfied. Thanks Mark. Quote Link to comment Share on other sites More sharing options...
Mark Clapp Posted November 17, 2014 Author Share Posted November 17, 2014 Hi Guys, I will be making the quarter windows soon in the same crack-proof plastic I use for the G-nose headlight covers I make. I have OE glass and am making the patterns. I was wondering how much larger all around I should make them to fill the quarter window recess since the trim will be eliminated, unless you choose to install the pieces in your trim. Thanks for any help on this. Mark Clapp 816-286-6982 Quote Link to comment Share on other sites More sharing options...
Mark Clapp Posted February 15, 2015 Author Share Posted February 15, 2015 Hi G-nosers, I finally received some photos of the G-nose covers I make in OE size fitted under the trim rings. These are on an OE G-nose that the owner will be installing on his car soon. I don't carry the trim rings and if you don't have them, I also make the covers in a smaller radius for what I call a "flush fit" with the edges of the light buckets. For the flush fit covers I include L-braces made from the same crystal clear plastic to mount them with (see the photos I've posted previously). I'm still asking $189/pair for either size. Feel free to email me at: mclapp1@att.net or better yet give me a call anytime at: 816-286-6982 to talk about your car and the light covers. Thanks, Mark Clapp Quote Link to comment Share on other sites More sharing options...
psdenno Posted February 16, 2015 Share Posted February 16, 2015 Any idea what was used as chrome trim on the flush mount lenses used on the red car above? It gives them a nice finished look. Dennis Quote Link to comment Share on other sites More sharing options...
Tony D Posted February 16, 2015 Share Posted February 16, 2015 Door Edge Trim sold on a roll, bought by the foot! You can get gold or chrome, plus some other chromatics and solid colors. Good to see this developing nicely, I wish I had the memory I once did to order what I said I needed. Argh! Quote Link to comment Share on other sites More sharing options...
Mark Clapp Posted November 10, 2015 Author Share Posted November 10, 2015 Hi G-nose fans, I just wanted to post that i'm still making the G-nose light covers and quarter windows. I have a new email address: mclapp5526@gmail.com in case you could use a set of light covers or have any questions about them. Thanks, Mark Clapp Quote Link to comment Share on other sites More sharing options...
nomorotors Posted November 12, 2015 Share Posted November 12, 2015 Pictures of the quarter windows? Thanks, -Jason Quote Link to comment Share on other sites More sharing options...
Zeeyah Posted November 13, 2015 Share Posted November 13, 2015 I want a set of zg headlight cover.... PM sent Quote Link to comment Share on other sites More sharing options...
Mark Clapp Posted November 14, 2015 Author Share Posted November 14, 2015 Hi Jason, I'll get some photos of the quarter windows up. I make them as an OE replacement and also in "competition" size that fully fill the window recess to eliminate the frame. Hi Zeeyah, I don't see a PM from you. Why don't you email me at: mclapp5526@gmail.com or better yet, give me a call anytime at: 816-286-6982 to talk about the light covers. Thanks, Mark Clapp Quote Link to comment Share on other sites More sharing options...
Mark Clapp Posted December 21, 2016 Author Share Posted December 21, 2016 Hi Guys, I just wanted to post and say that I'm still making the light covers for G-nose Zs and for the 250 GTO body kits. Please email me at: mclapp5526@gmail.com or feel free to give me a call anytime at: 816-286-6982. Thanks, Mark Clapp Quote Link to comment Share on other sites More sharing options...
Mark Clapp Posted November 15, 2017 Author Share Posted November 15, 2017 Hi G-nose Fans, I noticed that I haven't posted in a while. I get emails asking if I still make the light covers for the G-nose Zs. I am still making them and would be glad to make a set for anyone wanting to finish out their cars. The plastic I use is crack-proof so you don't need the special drill bits for plastic like you do for acrylic (Plexiglas). Any old bit will do fine with no cracking. I made my patterns from OEM G-nose light covers. I make them in the OEM size to use under the trim rings. If you don't have the trim rings, I also make them in a smaller radius for a flush fit with the light bucket edges. For these I include L-braces made from the same crystal clear plastic to mount the covers with. From a short distance, the L-braces disappear and the covers look like they are floating on the car. I'm still asking $189/pair and the shipping is covered with $20 within the U.S. and $30 to overseas. I also make the quarter windows in the same crack-proof plastic and ask $60/pair for those. Email me at: mclapp5526@gmail.com if you have any questions and feel free to call anytime at: 816-286-6982 to talk about your car and the light covers. Thanks, Mark Clapp 816-286-6982 Quote Link to comment Share on other sites More sharing options...
joey.youssef Posted November 17, 2017 Share Posted November 17, 2017 Hey Mark, Do you do the standard light covers? If not, any plans to? Quote Link to comment Share on other sites More sharing options...
Mark Clapp Posted November 27, 2017 Author Share Posted November 27, 2017 Hi Joey, sorry but I tried to make the standard Z light covers and due to the deep bubble shape, the edges bunched and waved. They must be vacuum-formed, which I'm not set up to do right now. Thanks, Mark Clapp Quote Link to comment Share on other sites More sharing options...
Mark Clapp Posted June 20, 2019 Author Share Posted June 20, 2019 Hi Guys and Gals, I get emails asking if I still make the ZG light covers and quarter windows and wanted to say that I do at the same price. Please email me at: mclapp5526@gmail.com with any questions and feel free to call anytime at: 816-286-6982 to talk about your car and the plexi pieces. Thanks, Mark Clapp 816-286-6982 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.