Boy from Oz Posted July 30, 2013 Share Posted July 30, 2013 Has anyone made up or purchased a cross-brace for the rear shock towers on a 240Z fitted with Arizona Z Car shocks? If so, could you provide a photo of the brace and fitting. Thanks. Quote Link to comment Share on other sites More sharing options...
JMortensen Posted July 30, 2013 Share Posted July 30, 2013 Just weld a tube across. Quote Link to comment Share on other sites More sharing options...
EF Ian Posted July 30, 2013 Share Posted July 30, 2013 Or if you want a removeable one, but a Cusco strut brace, cut the round part off (where the holes for bolting it on are) and weld it to the tower. Quote Link to comment Share on other sites More sharing options...
Phantom Posted July 31, 2013 Share Posted July 31, 2013 I wanted a bit more in mine so I have a three point, triangular brace. Top bar runs straight across the strut towers and then a second bar runs from the top bar on the passenger side down to the bottom of the strut tower on the drivers side. Nothings more rigid than a triangle. Quote Link to comment Share on other sites More sharing options...
Phantom Posted July 31, 2013 Share Posted July 31, 2013 Here is photo of the brace. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.