Hypertek Posted August 15, 2013 Share Posted August 15, 2013 (edited) http://www.thezstore.com/page/TZS/PROD/7AD1/50-1612 Obviously my thoughts are to trim the air dam to fit the G nose, that is if it was originally a copy of the factory works G nose lip just made to fit the stock- non G nose fascia. What do you guys think? Surely someone has this air dam that can provide close up pictures? I know zccjdm makes a direct G nose lip, but I don't want to be looking at spending over $400 if I will be going for the chopped look like alot of the jdm cars do it. http://www.zccjdm.com/catalog.php/azcarbum/dt46936/pd1993603/G_NOSE__240ZG__JDM_AIRDAM Jdm cars below with the chopped sides. This is the look I want to do with the air dam. Alot of jdm guys run that factory works style lip chopped. But there are a few full on . Another thought would be just to fabricate a styled air dam, but I don't know where to start with that. Edited August 15, 2013 by Hypertek Quote Link to comment Share on other sites More sharing options...
Richs72RBz Posted August 15, 2013 Share Posted August 15, 2013 You know i was thinking of the same concept except backwards. zccjdm airdam and add it to the msa airdam. Quote Link to comment Share on other sites More sharing options...
Tony D Posted August 15, 2013 Share Posted August 15, 2013 Argh! Argh! Argh! Looks like ZCCJDM may get an order from me yet! Quote Link to comment Share on other sites More sharing options...
texis30O Posted August 15, 2013 Share Posted August 15, 2013 Sorry to thread jack but what about those flares!!!! Tony where can one get those? I will need to cover my meats!!! Quote Link to comment Share on other sites More sharing options...
yhlz Posted August 15, 2013 Share Posted August 15, 2013 Anything can work if youre willing to put time into it. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.