Cleaning out rocker panels

[Clean]

I started working on my 78 280Z a few years ago, got divorced and it sat in the garage for 2 years... I just started working on it again and found a dead mouse and his nest inside the passenger rocker panel. I vacuumed out what I could, but there's still a ton of dirt and crap in there. Is there an easy way to get in there to clean all of it out? Any recommendations on a cleaning solution?

[tooquick260]

I ducked tape a 2 foot long garden hose onto my shop vacuum. Was able to get in a lot small area's. Was stiff enough to move around but flexible still.

[LanceVance]

I plan to find a soft wire brush you can chuck in a drill and get one of those flexible extensions when I get to cleaning up the rockers. Eastwood also sells a 'inside-the-frame' coating and rust converter with a special sprayer/hose to get at the stubborn surface rust deep in there.

[NewZed]

If you can smell the mouse pee you'll probably want to hose it out with water.  That stink will last forever.

[Clean]

Smell it... windows are staying open forever...

 

thanks for the responses! i'll try the hose and the spray coat.

[socorob]

I taped some of the cheap blue plastic conduit from Home Depot to my shop vac. You can also get a long brush for dryer vents for small hard to reach places. The plastic conduit will whistle pretty loudly though.

[78Z/250GTO]

I used the inside the frame coating from eastwood with its 18" 5 hole tip to spray all sorts of cleaners Primers and paint in areas that you could never get to without them.I even drilled a small hole and did inside my still solid dogsleg area then plugged it ...Jim