280~Master Posted March 4, 2014 Share Posted March 4, 2014 Does this look right or is it a tooth off? Quote Link to comment Share on other sites More sharing options...
JSM Posted March 4, 2014 Share Posted March 4, 2014 I don't know why, but to me it looks 180 the wrong direction. With the engine at TDC is rotor pointing at cyl #1 in the distributor cap? Go down load the FSM. You'll have to search for the image but it's in there. http://www.xenons130.com/reference.html Quote Link to comment Share on other sites More sharing options...
NewZed Posted March 4, 2014 Share Posted March 4, 2014 You're at zero? The picture's at EM-20 in the 1982 book. Quote Link to comment Share on other sites More sharing options...
280~Master Posted March 4, 2014 Author Share Posted March 4, 2014 The FSM shows a picture and all but its really hard to tell. Someone should be able to look and tell me if its one tooth off clockwise. Quote Link to comment Share on other sites More sharing options...
ctc Posted March 4, 2014 Share Posted March 4, 2014 You are more than one tooth off. Try again, then install distibutor and look where the rotor lines up with number one plug. Welcome to hunt and stab, took me a couple tries. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.