RebekahsZ Posted May 8, 2014 Share Posted May 8, 2014 For a N/A L28, I would do a subi 3.90 LSD, betamotorsports, or equivalent conversion stubs and stock u-joint axles with new u-joints. You will have new stuff with low miles that is up to the task. Cheap, easy, adequate. And if you get that much hp out of an L28 I will buy you a beer. Quote Link to comment Share on other sites More sharing options...
Phantom Posted May 12, 2014 Share Posted May 12, 2014 Better get that beer ready. Those 3.1 liter high compression stroker motors are definitely up in that range. Quote Link to comment Share on other sites More sharing options...
RebekahsZ Posted May 13, 2014 Share Posted May 13, 2014 Got one in the fridge. Got one for you too, so come on over. Quote Link to comment Share on other sites More sharing options...
6inline Posted May 28, 2015 Author Share Posted May 28, 2015 For a N/A L28, I would do a subi 3.90 LSD, betamotorsports, or equivalent conversion stubs and stock u-joint axles with new u-joints. You will have new stuff with low miles that is up to the task. Cheap, easy, adequate. And if you get that much hp out of an L28 I will buy you a beer. Thank you all for the answers. I will probably go for an aftermarket Lsd bolt on into my R180. I am not a drag guy. I need new half shaft U-Joint. I order 4 from the local partstore. 30$ eah, MOOGs U-Joint. Did not fit. I could not slide the E-clip back. So as I compare my original with the MOOGs, I notice the MOOGs were a little larger than my original. So now I dont realy know where to get good ones. If I remember correctly the originals were 56 mm. Anyone encounter this before me? thanks a lot again, this forum is so helpfull! Quote Link to comment Share on other sites More sharing options...
NewZed Posted May 28, 2015 Share Posted May 28, 2015 I need new half shaft U-Joint. I order 4 from the local partstore. 30$ eah, MOOGs U-Joint. Did not fit. I could not slide the E-clip back. So as I compare my original with the MOOGs, I notice the MOOGs were a little larger than my original. So now I dont realy know where to get good ones. If I remember correctly the originals were 56 mm. Anyone encounter this before me? Did you get propeller shaft u-joints, or half-shaft u-joints? They're different. Post the MOOG part number, Quote Link to comment Share on other sites More sharing options...
6inline Posted June 1, 2015 Author Share Posted June 1, 2015 Half shaft u joints. The moog did not fit because they were a .100 too large, I could not fit the E clip. I remember my original are 56mm from top to top. The moog were like 57mm... I dont have the part number anymore, I already have brought them back. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.