Ham8urger Posted June 15, 2014 Share Posted June 15, 2014 Which air dam is this and how can I fit it to a 78' 280z? Quote Link to comment Share on other sites More sharing options...
ryant67 Posted June 15, 2014 Share Posted June 15, 2014 Xenon 3124 air dam, made of urethane. I don't imagine you need to do much to fit it to a 280Z, although it's designed as a 240Z air dam. You can see the empty 240Z turn signal sockets in the air dam - Xenon makes the same air dam for the 280Z with those filled in, part number 3125. Quote Link to comment Share on other sites More sharing options...
Ham8urger Posted June 15, 2014 Author Share Posted June 15, 2014 Thanks! Quote Link to comment Share on other sites More sharing options...
socorob Posted June 27, 2014 Share Posted June 27, 2014 OK, anyone know what this one is? Quote Link to comment Share on other sites More sharing options...
260DET Posted June 27, 2014 Share Posted June 27, 2014 Don't know but from that angle it looks like it suits the cars lines great, better than any others and I have seen lots. Quote Link to comment Share on other sites More sharing options...
Gareth. J. Posted June 27, 2014 Share Posted June 27, 2014 Looks to me like a Kameari air dam with a custom splitter underneath. Quote Link to comment Share on other sites More sharing options...
socorob Posted June 27, 2014 Share Posted June 27, 2014 I saw a similar one to this on ebay a while back, except it had scoops that were way too wide to the outside, pretty much in front of the tires. It was pointed in the front like this to follow the same shape as the hood. This is my favorite one I have seen so far, but haven't been able to find it anywhere. Quote Link to comment Share on other sites More sharing options...
ryant67 Posted June 28, 2014 Share Posted June 28, 2014 Ask and ye shall receive - http://www.topstage.com/shopping/Scroll down to "S30 240z 260z Aerodynamic Front Spoiler". Looks like that's very close to the air dam in the picture you posted. Bad news is that Top Stage is located in Australia, so the shipping would be pretty expensive. If I were you, I would buy a Kameari style front air dam in fiberglass, perhaps the MSA type 1, and modify the lip so it protrudes more. Might be a bit of hassle, or money, but it's doable. Quote Link to comment Share on other sites More sharing options...
socorob Posted June 28, 2014 Share Posted June 28, 2014 Thanks, its close but no cigar. The subtleties are what makes that one look so good. The bottom lip + following the angle of the bumper and hood when viewed from above + it sloping the same way as the grill when viewed from the side make it totally match the car. In my opinion none of the other ones look quite right. I've scoured the internet a few times looking for this one with no luck. I can't even remember where I found this picture at, it's been my desktop since I started building my Z. The search continues..,, Quote Link to comment Share on other sites More sharing options...
socorob Posted June 28, 2014 Share Posted June 28, 2014 Its almost like a cross between the subtle z one and this one http://www.google.com/imgres?imgurl=http%3A%2F%2Fwww.kamikazeracing.org%2Frbz%2FIMG_2167.JPG&imgrefurl=http%3A%2F%2Fwww.pro-touring.com%2Fthreads%2F82024-PT-datsun-240z&h=490&w=653&tbnid=e01m3vRJC1XjjM%3A&zoom=1&docid=TZ82HqDfv9BljM&ei=OFGuU92LE4elqAazp4DABA&tbm=isch&client=firefox-a&ved=0CEsQMyhDMEM4yAE&iact=rc&uact=3&dur=4109&page=24&start=266&ndsp=12 Quote Link to comment Share on other sites More sharing options...
socorob Posted June 30, 2014 Share Posted June 30, 2014 http://pages.ebay.com/link/?nav=item.view&alt=web&id=131229130042 This mould is close. The back edge doesn't line up quite as good. Quote Link to comment Share on other sites More sharing options...
yhlz Posted July 13, 2014 Share Posted July 13, 2014 (edited) The secon airdam you posted is most likely from Japan. If you look at the Zs from Star Road or Rocky Auto (the Zs with airdam without brake ducts) they have similar airdams. Edited July 13, 2014 by yhlz Quote Link to comment Share on other sites More sharing options...
socorob Posted July 15, 2014 Share Posted July 15, 2014 Figures all the ones I'm looking for are on the other side of the world. Quote Link to comment Share on other sites More sharing options...
Six_Shooter Posted July 28, 2014 Share Posted July 28, 2014 Figures all the ones I'm looking for are on the other side of the world. At least you have leads on some that should be available. I'm looking for one that no body seems to want to sell me. Long out of production, and everyone wants to keep it. Quote Link to comment Share on other sites More sharing options...
socorob Posted October 8, 2014 Share Posted October 8, 2014 http://fairlady-parts.com/detail.html?TENO=773 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.