skyline240z Posted September 7, 2016 Author Share Posted September 7, 2016 That's is true,I've checked them out in the past. They have a very good package, but you are restricting to their pump setup. In my build, I can have whatever pump I choose and how many stages, just need to build new mounts. I do have the same concept as you can see in the pictures that three channels running across back to the pump side, so the three scavenge ports are Close to the pump and need little amount of lines, but yes, you still need fittings. I think having fittings make it a lot cooler. Quote Link to comment Share on other sites More sharing options...
skyline240z Posted September 8, 2016 Author Share Posted September 8, 2016 Hi Ef Ian I made two in case I screwed up. Also can make more in the future Quote Link to comment Share on other sites More sharing options...
EF Ian Posted September 20, 2016 Share Posted September 20, 2016 Great news, those looks lovely. Would be nice to go dry sump at some time, would just have to work out a good location for the tank. Quote Link to comment Share on other sites More sharing options...
ZT-R Posted September 26, 2016 Share Posted September 26, 2016 Do you have any height measurements off the front of the pan section (for rack clearance)? Quote Link to comment Share on other sites More sharing options...
skyline240z Posted September 26, 2016 Author Share Posted September 26, 2016 ZT-R Hopefully you can see it, from the bottom of the block, .250 pan lip .650 first drop 1.43 second drop 2.40 bottom of pan Centre of hole of oil pump body to edge of pan lip is 0.43 0.86 front of lip to first drop 1.50 second drop 4.125 third drop Quote Link to comment Share on other sites More sharing options...
ZT-R Posted December 20, 2016 Share Posted December 20, 2016 Any progress on this? Quote Link to comment Share on other sites More sharing options...
skyline240z Posted December 23, 2016 Author Share Posted December 23, 2016 The pans are finished but I have no engine to fit it into. My 240 build is 1-2 years away from being finished . - Rick Quote Link to comment Share on other sites More sharing options...
skyline240z Posted December 23, 2016 Author Share Posted December 23, 2016 (edited) Here is a picture of my build. Edited December 23, 2016 by skyline240z Quote Link to comment Share on other sites More sharing options...
ZT-R Posted December 24, 2016 Share Posted December 24, 2016 dang, so much fiberglass. Quote Link to comment Share on other sites More sharing options...
510sr20det Posted September 27, 2017 Share Posted September 27, 2017 Several other companies make the RB26 dry sump pan. Pan, not the expensive part. pump and all the hardware is.. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.