MaritimeRiceburn Posted May 18, 2015 Share Posted May 18, 2015 Gonna be honest, wasn't thinking physics through on the old bushing press and bent my control arm more than it already was. Now with my press bend the two bushing carriers for the spindle pin don't line up. Is it at all safe to bend these buggers back into shape or is it a trip to the classifieds to find someone who will ship to NS? Quote Link to comment Share on other sites More sharing options...
z240 Posted May 18, 2015 Share Posted May 18, 2015 I've bent those too. Not all that strong when not assembled. If you need one, just let me know. z240@shaw.ca Quote Link to comment Share on other sites More sharing options...
NewZed Posted May 18, 2015 Share Posted May 18, 2015 Considering that the hub and the inner mounting points have rubber between them and the arm, it's probably not a precision piece. Although the hub casting does have to fit between those ears and the two surfaces probably need to be parallel and of certain distance apart. If you can't get the hub housing in there you're kind of screwed anyway. Quote Link to comment Share on other sites More sharing options...
johnc Posted May 18, 2015 Share Posted May 18, 2015 Get a replacement part. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.