Ben280 Posted December 21, 2015 Share Posted December 21, 2015 Hey all! I'm doing my megasquirt conversion, and I am wondering what others have used for TPS sensors and throttle bodies. I'm still using the stock manifold for now and already have the adaptor to use a 240sx throttle body. Any idea what will bolt up, and be easy to program with MS3? Thanks! Quote Link to comment Share on other sites More sharing options...
madkaw Posted December 21, 2015 Share Posted December 21, 2015 Why not use the 240sx TPS? Quote Link to comment Share on other sites More sharing options...
Ben280 Posted December 21, 2015 Author Share Posted December 21, 2015 Hey Madkaw! While I was using a 240sx throttle body, I had done away with the sensor and converted the throttle body to work with the 280z TPS. I figure if I have to go to a junkyard or search Ebay, I might as well see what other options were available to me. Quote Link to comment Share on other sites More sharing options...
dexter72 Posted December 21, 2015 Share Posted December 21, 2015 Any mid to late 90's nissan Tps will work fine.. If you buy / find the smaller Tps you can make that bolt to the larger 70's nissan Tps.. Quote Link to comment Share on other sites More sharing options...
FricFrac Posted February 2, 2016 Share Posted February 2, 2016 We do a lot of builds with the 240SX TPS with MegaSquirt and the L28ET. One thing to note is that after 25 years a lot of these sensors tend to be noisy. We have had limited sucess in cleaning them and have them continue to be reliable. I recommend to most of my customers to but new TPS to avoid grief from a noisy sensor. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.