BluDestiny Posted December 15, 2016 Share Posted December 15, 2016 So I just got my car dynoed yesterday (it's still going to the shop it's being built at, and the tq number for me seems pretty low. I've seen most setups with this turbo put out around the same # hp/tq numbers Mods: sr20det with wiseco pistons/eagle rods Tomei solid lifter kit with 256 cams Gt28/71r at 12psi CR racing top mount T25 manifold (modified by TF Works) Freddy intake (came with the motor) id1000 injectors AEM 320 pump AEM infinity ecu Custom intercooler Stock SR20 tranny with a 3.9 clsd diff If you need more added to the list let me know. I'm thinking it could be a product of the cam profile, but maybe not. I will be going with flex fuel down the line hence teh large injectors and pump. I just want to be able to test out the car and "break it in" without breaking the tranny or anything first, so this is a conservative tune. If this is normal for the amount of boost, then I'm just an idiot. Maybe I should have had it turned up some more. Quote Link to comment Share on other sites More sharing options...
jeffer949 Posted December 15, 2016 Share Posted December 15, 2016 Something is off on that dyno sheet. The torque and Hp dont cross at 5252. It mathematically has to cross there so I'm not sure what is wrong with the dyno chart or the dyno. Quote Link to comment Share on other sites More sharing options...
BluDestiny Posted December 15, 2016 Author Share Posted December 15, 2016 It will be getting another dyno, but not until spring. That actually is a good point that I didn't even realize. Quote Link to comment Share on other sites More sharing options...
jessejames Posted December 23, 2016 Share Posted December 23, 2016 The torque number seems low. I will be heading to the dyno soon with a similar size turbo aND similar engine setup. I'm I'm the process of doing the headgasket. It LikEly won't happen until the new year. Quote Link to comment Share on other sites More sharing options...
jessejames Posted April 10, 2017 Share Posted April 10, 2017 I just dynoed my Z. I have the Sr20det stock long block, metal head gasket, EFR6258 with ID 1000 CC. On 16 psi I put 289whp on a mustang Dyno. I'll try to post a sheet later. I was told by the tuner that the cams were holding it back. Thats on crappy Canadian chevron 94 gas. Quote Link to comment Share on other sites More sharing options...
jessejames Posted April 12, 2017 Share Posted April 12, 2017 (edited) Sorry about the quality. Taken with cell phone with broken lense. Edited April 12, 2017 by jessejames Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.