GIchiro Posted March 5, 2017 Share Posted March 5, 2017 Does anyone have a pic of the wiring harness route from passenger firewall to rear quarter panel on a 1973 240Z. -Any grommets needed at junction points (i.e. interior light, rear brake route). Thank's GI Quote Link to comment Share on other sites More sharing options...
RB26powered74zcar Posted March 6, 2017 Share Posted March 6, 2017 It would be very helpful for you to acquire a Service Manual. It should show all the harness routing. Sorry, that's all I can offer for help... Quote Link to comment Share on other sites More sharing options...
GIchiro Posted March 6, 2017 Author Share Posted March 6, 2017 I do have a service manual, but it does not show the detail of the routing by the evap canister forward to the pass. door. It is the 1972 factory manual. Quote Link to comment Share on other sites More sharing options...
88dangerdan Posted March 6, 2017 Share Posted March 6, 2017 (edited) This is out of the '73 fsm Sorry, don't know why it flipped Sideways on me. Edited March 6, 2017 by 88dangerdan Quote Link to comment Share on other sites More sharing options...
cgsheen Posted March 7, 2017 Share Posted March 7, 2017 The harness runs down to the floor on the right side, over the seat mount, then into the quarter through a big hole just behind the door. That hole has a grommet. It goes back into the abyss - over the wheel well then down in front of the evap canister and to the floor. (it can be difficult to fish the harness through this space...) Somewhere around there (before there) the dome light and rear window defrost take off. The rear-end wiring goes down to the deck in the quarter and back to the rear. It comes through a smallish hole to the right of the tails and across the back of the car to the left for the lights and then continues on to the speaker and antenna. Near the evap canister, the wiring to the fuel tank goes down through a hole with a grommet. Everywhere the harness passes through sheet metal there should be a grommet... Quote Link to comment Share on other sites More sharing options...
NW240Z Posted March 7, 2017 Share Posted March 7, 2017 I can try and get some pic's of my 73 parts car tomorrow, it's been snowing, and well I just didn't want to go out and get pic's in the snow to be perfectly honest. cgsheen has the routing about right, in verbiage. Quote Link to comment Share on other sites More sharing options...
GIchiro Posted March 7, 2017 Author Share Posted March 7, 2017 Thank you all for the replies. Just trying to finish this sadly failed project and get it to my son. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.