Jss240z Posted April 15, 2017 Share Posted April 15, 2017 So I've only posted a couple times and I have lots of pictures of the things I did/do to my Z, and I do have a question. But first a little show and tell . I was frustrated I couldn't find air horns for my Weber carbs that I thought where correct (opinion only), so part owning a machine shop, i made these. I chose to make them two piece because they are easier to machine being thin wall and I only need to make the bell half if I want to change the design later. I have two questions .. 1) is there anyone that makes filter that are actually filters?. (As opposed to just mesh screens I've seen) 2) should I have made the bell half tapered like I did? I do apologize if these questions have been beaten to death and I did search so feel free to tell me to search more if that's the case. Quote Link to comment Share on other sites More sharing options...
rjracin240 Posted April 15, 2017 Share Posted April 15, 2017 My those are pretty sweet any chance of 6 for my 44 Mikunis? Quote Link to comment Share on other sites More sharing options...
Jss240z Posted April 15, 2017 Author Share Posted April 15, 2017 Absolutely. For the right price lol. Have about 8 hours in them ( programming, set up and a couple scrap trial parts) so unless they aren't made, probably cheaper to buy from someone who makes lots at a time. Quote Link to comment Share on other sites More sharing options...
Jss240z Posted April 15, 2017 Author Share Posted April 15, 2017 I should clarify that the filters I'm speaks of is something that doesn't cover the whole air horn. I would like to show off what I made a bit. Currently I have a k&n that covers both horns on each carb. Quote Link to comment Share on other sites More sharing options...
grannyknot Posted April 15, 2017 Share Posted April 15, 2017 Nice horns, there are these guys, http://www.ramair-filters.co.uk/products/automotive/carburetor-itbs-automotive/sock-filters-automotive/ but their website doesn't give much info, I found their ebay site better to use, http://www.ebay.com/itm/Ramair-Motorcycle-Carb-Velocity-Stack-Sock-Foam-Air-Filters-/351209511379?hash=item51c5b7d9d3:g:FmQAAOSwAYtWHStV&vxp=mtr Quote Link to comment Share on other sites More sharing options...
Jss240z Posted April 15, 2017 Author Share Posted April 15, 2017 Yes, that's kind of what I mean going for. Except not so much the foam ones. Reading here on here it seems like some people have had problems with that foam type getting soaked with fuel . Now the ones I have now do have some fuel that gets into them sometimes but the thought of foam gets me nervous. In my head I have a picture like this, but with an actual filter on them. Kinda want the looks and performance . http://toyheadauto.com/PerformancePages/PerPics/Air_Horn_Screen_Filters.jpg Actually thinking about it , has anyone used these and added their own cotton type filter screen to them? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.