98cobra+75280z Posted October 11, 2017 Share Posted October 11, 2017 (edited) Have a pretty severe dent in my rear quarter/tail light surround that I think will be easier to just cut out and weld in a patch panel. Before I go down the route of making a piece I thought someone may be stripping/parting out a car that could put the piece I need out. If anyone is willing to cut out the piece I need please message me here or text/call at 812.593.4511. Edited October 11, 2017 by 98cobra+75280z Quote Link to comment Share on other sites More sharing options...
72240Z Posted October 12, 2017 Share Posted October 12, 2017 If I were you I would pound it out with a body hammer. But if you want that piece I have a 73 240 I can cut it off, if you will draw a line around where you want it cut I will make sure the piece I have is good $25 plus shipping from Asheboro NC 27203 Quote Link to comment Share on other sites More sharing options...
rturbo 930 Posted October 13, 2017 Share Posted October 13, 2017 I agree with trying to pull it out. I think that would probably be easier. Quote Link to comment Share on other sites More sharing options...
cgsheen Posted October 26, 2017 Share Posted October 26, 2017 (edited) +1 Patricks 260Z was hit by a Silverado. There's a bit of room behind the rear quarter. I was able to hammer it out and get it close enough all it took was a skim of glaze to get this corner back. Edited October 27, 2017 by cgsheen add pics Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.