nnaxor Posted July 18, 2018 Share Posted July 18, 2018 I have an '83 280zx and I wanted to replace my old steering coupler but after searching online, I can't find a rubber/poly replacement that will fit. Only ones I'm finding available are couplers for the manual rack 280zx or s30 models. I'm wondering does anyone know if any couplers from any earlier models will fit despite all these websites telling me otherwise? I'm trying not to resort to buying the pricey solid aluminum one from T3. Here's the link to it: https://technotoytuning.com/nissan/s130/steering-coupler-280zx-power-rack Quote Link to comment Share on other sites More sharing options...
nismoluv Posted January 31, 2019 Share Posted January 31, 2019 I recall someone mentioning that they made their own out of rubber or something. I think it was in one of the ls1 swap post. I think it was done for clearance. Ill see if I can find the poster. If you look at the joint, it looks fairly easy to just replace the rubber bit. I recently replaced my mustang steering shaft with a solid shaft (no rubber rag joint) and the steering is now super crisp. You can actually "feel" the road now. Quote Link to comment Share on other sites More sharing options...
TUME Posted January 31, 2019 Share Posted January 31, 2019 I did mine out of hockey puck. Quite cost effective. 1 Quote Link to comment Share on other sites More sharing options...
Miles Posted January 31, 2019 Share Posted January 31, 2019 Try MSA: https://www.thezstore.com/page/TZS/CTGY/classic20i Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.