christianmoller Posted January 24 Author Share Posted January 24 Good evening, I now have a working two speed PWM controlled C7 fan. I used an Arduino to create a PWM signal at 50 percent(LOW) 90 percent (HIGH) and some slope up/down between the different stages. I added a voltage regulator i had around when fixing my dodgy gauges on the Datsun (LM7810). /Christian Quote Link to comment Share on other sites More sharing options...
Box5 Posted April 8 Share Posted April 8 Very nice build so far, looking forward to your updates as you go. Quote Link to comment Share on other sites More sharing options...
christianmoller Posted April 9 Author Share Posted April 9 (edited) It has been a very slow progress for a couple of months unfortunately but i hope to take a test run this summer. Edited April 9 by christianmoller Quote Link to comment Share on other sites More sharing options...
christianmoller Posted April 14 Author Share Posted April 14 hello, Some tiny small steps right now. I have started with the frame rails and have made the part that will go inside the car. 1.5mm steel that goes front to rear. New ones under the car are being made with a higher profile than standard, 45mm in front and 25 in the rear. Christian 1 Quote Link to comment Share on other sites More sharing options...
Rivvs1 Posted April 27 Share Posted April 27 First time I see frame rails added to the inside. Full lenght rails under the floor would have not been enough? Quote Link to comment Share on other sites More sharing options...
A to Z Posted April 27 Share Posted April 27 it should, however some guys think out of the box and do their own work. Quote Link to comment Share on other sites More sharing options...
christianmoller Posted April 29 Author Share Posted April 29 Crazy Scandinavians🤣. My intension was to have 65mm in profile height but then it starts to "eat" on ground clearance so i got the idea from my old Mercedes C43 were most reinforcement were on the inside , probably to get a flat underside. /Christian Quote Link to comment Share on other sites More sharing options...
christianmoller Posted Sunday at 03:36 PM Author Share Posted Sunday at 03:36 PM (edited) good evening frame rails are done and also some reinforcement to the transmission mount,inspector wants it). He will visit June 16 for the first inspection and after that i have five years to build for the final inspection were he wants to see a working vehicle. i also start with the carpet and sound deadening as i wait for him. Clutch is in the mail and only waiting for the half shafts to be made :). A new props shaft is made, for the first time i bought a new one instead of building my self(want a proper made one:)) /Christian Edited Sunday at 05:03 PM by christianmoller 1 Quote Link to comment Share on other sites More sharing options...
socorob Posted Wednesday at 03:09 PM Share Posted Wednesday at 03:09 PM (edited) I went to Sweden about 15 years ago, and at night we asked people wheres a good place to go in Stockholm. I guess it was after midnight, and several people said Applebees of all places. I thought that was weird until I got there. It was packed, then then I saw why. People were street racing all kinds of crazy stuff that you could see from the outside tables. I saw everything from a Lambo race a 4 wheeler to a ferrari racing a street bike. It was kind of wild. Edited Wednesday at 03:26 PM by socorob Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.