rags Posted September 3, 2003 Share Posted September 3, 2003 I've been searching for an hour with no luck. Does anyone have a source for mandrel bent stainless tubing? I found straight pieces but I need a few 90's and a few 45's. I would settle for a 180 and cut it! Joe Quote Link to comment Share on other sites More sharing options...
Kennysgreen280zt Posted September 3, 2003 Share Posted September 3, 2003 http://www.burnsstainless.com is where I have found some stuff. they are rather pricey. If you can live with normal steel, JCWhitney has some great prices on mandrel bends Edit!!! I guess Jegs sells them too.... twards the bottom of the page. http://www.jegs.com/cgi-bin/ncommerce3/ProductDisplay?prrfnbr=1327&prmenbr=361 Quote Link to comment Share on other sites More sharing options...
JMortensen Posted September 3, 2003 Share Posted September 3, 2003 I don't know if you can use stainless exhaust tubing or if you need something thicker. Closer to the bottom of the page... http://www.jcwhitney.com/catsubpic.jhtml;$sessionid$M3APMNIAABJQUQSNDV0SFE0CJUOXKIV0?CATID=3170&BQ=jcw2 Jon Quote Link to comment Share on other sites More sharing options...
240Z Turbo Posted September 3, 2003 Share Posted September 3, 2003 Burns is expensive. Try one of these 3 places. I believe Kooks or stainless works will be the least expensive. Specialty Products Design(good for 321 SS bends) http://www.spdexhaust.com/ Kooks Custom Headers http://www.kookscustomheaders.com/ Stainless Works http://www.stainlessworks.net/ Quote Link to comment Share on other sites More sharing options...
slownrusty Posted September 3, 2003 Share Posted September 3, 2003 I use Stainless Works - they are the cheapest on the 'net and everyhwere I checked. Ben from Stainless Works is friendly and helpful. They have a laser department and cut custom made flanges etc for you as well. Regards - Yasin Quote Link to comment Share on other sites More sharing options...
rags Posted September 3, 2003 Author Share Posted September 3, 2003 Thanks guy's. Filled out my order form at Stainless Works this morning! Joe Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.