Jump to content
HybridZ

Dyno results with powerglide


240Z Turbo

Recommended Posts

The results are in with the new powerglide.

451hp/509ft-lbs@wheels

Boost was set to 28psi and I was NOT running the nitrous.

The car is running pig rich so I suspect it will gain another 40-50hp@wheels with tuning. I am pleased considering this is using an auto tranny which typically read lower than stick cars on the dyno. The last time I dynoed the car it read 311hp@wheels and ran 129.6mph in the 1/4 the following day :?: . Unfortunately, I did not have my nitrous bottle back from being filled. I will run the car in two weeks after I get the transbrake hooked up and new front tires. Anyway, not too bad considering the head only flows 200cfm on the intake ports :cry:

dyno1.jpg

dyno2.jpg

Link to comment
Share on other sites

That is absolutely awsome :shock: I only wish my sbc 383 could come close to those numbers. I am runing mid to low 11's with a 383/700r4 combo putting 370hp to the wheels.

 

Look forward to seeing what you can do with it :!:

 

Mike

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...