Jump to content
HybridZ

Low rise garage lift, thoughts?


dsommer

Recommended Posts

I'm tired of working under the car while it's up on jackstands what do you think of this lift? Of course jack stands will still have to be used if performing suspension work but I would feel safer. Are there other you would recommed? Too bad I don't have room for a "real" lift, next time.

 

http://www.kwiklift.com/features-all.htm

Link to comment
Share on other sites

Seems like it would be harder to work on a car on one of those lifts than it would be to just put it on jackstands. Those two long ramps would be in the way if you were trying to do anything more than pull drivetrain stuff. Basically anything that wasn't right in the middle of the underside of the car would be tough to get at. That's my 1st impression.

 

If memory serves Jeromio has a lift like that. You might want to ask him directly.

Link to comment
Share on other sites

It does make it nice to work under the Z and much safer when you want some breathing room underneath. Only problem is as Jon mentioned, they're always there and tough to move around so if you've got a designated place for them to always stay and don't mind pulling up on them every time you pull into the garage, they're great. It's also nice when you want to look at the suspension geometry while it's sitting on all 4 tires. You can get to everything under the Z when it's on the lift. Made a recent tranny swap actaully enjoyable! lol. There's a black brace that actually spreads both ramps and locks into groves that can slide front or back so you can use a (bottle)jack to lift the car off it's suspension. A friend of mine was getting a "real" lift and just gave these to me. Not sure if i'd spend what they want for them.

 

KwikLift_Side.JPG

 

KwikLift_Rear.JPG

Link to comment
Share on other sites

DOn't get me wrong... IT is a nice thing to have I'm sure and beats the hell out of jack stands... But I paid $900 for a used lift... You can get hydraulic low level lifts that still raise the car about 5-6 ft. for not much more than that unit...Mayb $1500-2000 referbished!

 

Mike

Link to comment
Share on other sites

I always thought it would be nice to have a hoist in the garage even if the ceiling isn't high enough. Even if you only lifted the car high enough to do brake work or whatever, it would sure beat jackstands. If you had to do something that requires walking under the car (like a tranny) You could always get yourself a nice chair with wheels to sit on. Kind of ghetto, but still would beat lifting a tranny while laying on your back.

Link to comment
Share on other sites

I've got one (different brand) called a "Tilt Lift." It pivots like a see saw... you drive up on it, the front comes down, then you pull some pins and the rear "legs" fall down to keep it horizontal.

 

It beats the heck out of jack stands! And I got it for free. I'm sure you could find these things used pretty cheaply, or weld one together.

Link to comment
Share on other sites

Some of the lift makers actually have hydraulic lifts designed for 9ft. ceilings. They don't get the car nearly as high in the air, but still... Makes doing work so much easier... These units being mentions are certainly a good alternative to jack stands and hey, free is the right price!

 

Mike

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...