240ZR Posted August 28, 2006 Share Posted August 28, 2006 I have salvaged a 240z rear louver kit of a junkyard 260.... not all i need to know is how to mount it since all the bits that help it on where rotted or broken/Rusty or missing........ and where can i get the rear 1/4 windows louvers.... Quote Link to comment Share on other sites More sharing options...
Sparks280zt Posted August 28, 2006 Share Posted August 28, 2006 there were some 1/4 window louvers in the classifieds being sold by 280zforce Quote Link to comment Share on other sites More sharing options...
COZY Z COLE Posted August 28, 2006 Share Posted August 28, 2006 Post on description of parts and how to install.... http://www.classiczcars.com/forums/showthread.php?t=18914&highlight=LOUVERS LARRY Quote Link to comment Share on other sites More sharing options...
veritech-z Posted August 28, 2006 Share Posted August 28, 2006 Olderthanme has some louvers for the side windows he might be willing to part with. Quote Link to comment Share on other sites More sharing options...
OlderThanMe Posted August 28, 2006 Share Posted August 28, 2006 yeah...give me an offer for mine. In the $110+shipping range...if you want them. they have 4 louvers per side. perfect condition. Quote Link to comment Share on other sites More sharing options...
RedNeckZ Posted August 29, 2006 Share Posted August 29, 2006 Do you have the louver set that sits in the window frame or the set that fits over the whole window? There was two different kinds made. The set that sits in the window frame has mounting hardware that is held in by the rubber seal around the window. You had to push it in from the glass side, top and bottom to mount it in. The second set has the mounting brackets on top. All you have to do is drill the holes and mount it with stainless steel srews. On the bottom it has a sliding bolt system, like a gate securing bolt, only smaller. You can get them from most hardware stores if needed. After mounting the top screws, just line up the bottom holes and drill them. Again use stainless screws to secure them. Add some rubberized gasket material (form a gasket) to the screws to keep them water tight. Good Luck, Rich. Quote Link to comment Share on other sites More sharing options...
jbk240z Posted August 29, 2006 Share Posted August 29, 2006 the leg warmers and feathered hair style to go with the louvers! Or maybe a sweat band and a jerry-curl! Time to break out that Rockwell record. Just kidding man, to each his own. Quote Link to comment Share on other sites More sharing options...
Guest 280ZForce Posted August 29, 2006 Share Posted August 29, 2006 240zr - pm sent Quote Link to comment Share on other sites More sharing options...
proxlamus© Posted August 30, 2006 Share Posted August 30, 2006 i have a set of rear window louvers ill give to someone if they pay for shipping Quote Link to comment Share on other sites More sharing options...
Guest 240ZPompanoFlorida Posted September 12, 2006 Share Posted September 12, 2006 There is a set of Jim Cook racing side window louvers on ebay DATSUN 240 240Z 260 280 Z 280Z NEW REAR WINDOW LOUVERS Item number: 220025098454 at $40 + 8 shipping with 2 days left. I have a orig. 72 240 Z with the orig. alum. rear louvers that have the dead bolt springed latch bottom and screws into top metal on hatch above window glass. Can take pictures of the mounts if you like, pm me your email . Does anyone know how to restore the rubber that is around the louver, mine is intack but hard and has many very small cracks in it. Is there something I can treat the rubber with to help it last. It is the orig. louvers from factory or dealer unsure which. thank you Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.