alexideways Posted January 27, 2007 Share Posted January 27, 2007 I just removed my tranny from my RB25 today and noticed, to my big suprise, that on the filywheel, there's a small NISMO logo so, I check closer and... what do you know? A nismo logo on the pressure plate, I remove the clutch, another NISMO logo on the disc. :The question is... does anyone knows what I really have here? Flywheel: RSR21 Clutch disc: RS240 pressure plate: RS245 4K29-30210 These are the # I have stamped in each part. Quote Link to comment Share on other sites More sharing options...
Tony D Posted January 27, 2007 Share Posted January 27, 2007 E-Mail Nismo in Nashville (shudder) and they can tell you the sourcing and probably the specs on the parts. They should, at least. Quote Link to comment Share on other sites More sharing options...
alexideways Posted January 27, 2007 Author Share Posted January 27, 2007 Thanks Tony, you're grrrrrrrrrrrrrrrrrrrreat. Quote Link to comment Share on other sites More sharing options...
johnc Posted January 27, 2007 Share Posted January 27, 2007 E-Mail Nismo in Nashville And if you get a reply, let me know. They haven't replied to any of mine in 3 months. Tony, you got any of the bronze oil pump drive gears? I need 6. Quote Link to comment Share on other sites More sharing options...
AKWIKZ Posted January 27, 2007 Share Posted January 27, 2007 Actually, there is no Nismo in Ten. It is Nissan Motorsports. Nismo is a seperate body, Nissan Motorsports International. Nissan U.S.A. is now able to order some Nismo parts, but this is a relatively new situation as for several years Nismo would not deal with Nissan U.S.A. You will also find some problems with any part number including an "R" in it. These are all non-U.S.A. parts and can be difficult to source sometimes. Back when I had an FJ20 in my Roadster I tried to get parts for it. I even had all the part numbers but was told repeatedly that I was S.O.L. Brian Quote Link to comment Share on other sites More sharing options...
MrFancypants Posted January 27, 2007 Share Posted January 27, 2007 Anybody read Japanese? Part numbers show up in the RB20/25 section. Im guessing you've lucked out! http://www.nismo.co.jp/products/productguide/r32/partslist.html - Greg - Quote Link to comment Share on other sites More sharing options...
alexideways Posted January 27, 2007 Author Share Posted January 27, 2007 Wow, thanks MrFancypants, now I just neeed to find a good translation software and I'm good. Anyone would know of a good website for this???? Quote Link to comment Share on other sites More sharing options...
Roostmonkey Posted January 29, 2007 Share Posted January 29, 2007 Alex...call 888-449-5131 ask for Shea. He was very helpful when I was ordering a sump and pickup for my RB26. He's in washington state at NIsmo. Mine came with a billet Nismo clutch too but i havent inspected it for #'s yet. Quote Link to comment Share on other sites More sharing options...
alexideways Posted January 29, 2007 Author Share Posted January 29, 2007 Quote Link to comment Share on other sites More sharing options...
Roostmonkey Posted January 30, 2007 Share Posted January 30, 2007 Did you talk to Shea? I just checked out the Nismo clutch assy that came with my motor. Does yours look like this? Quote Link to comment Share on other sites More sharing options...
alexideways Posted January 30, 2007 Author Share Posted January 30, 2007 Did you talk to Shea? I just checked out the Nismo clutch assy that came with my motor. Does yours look like this? No, my press. plate cover is Grey and I have a one puck, unsprung center disc. I also had a NISMO Flywheel with that. As for Shea, I haven't called him yet as I only have a cell phone and calling another country is quite expensive. You have an e-mail I could reach him at? Thanks for your time. Alex. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.