Ferd/289 Posted February 1, 2007 Share Posted February 1, 2007 My compressor's unloader tube which is 18 inches long needs to be replaced. The guy at Campbell Hausfield says 18 inches costs $23 and its made of teflon. Anyone know what can I use instead, or get cheaper? The PSI requirement is 125 and the dimensions of the plastic tubing is 5mm od and 3 id. Lesson learned, don't buy HF compressor auto drain, or dont throw out old unloader tubing? Ferd Quote Link to comment Share on other sites More sharing options...
Brad-ManQ45 Posted February 3, 2007 Share Posted February 3, 2007 Go to any hydraulics supply shop and they should have the stuff - Royal Brass is where I got mine in Marietta, GA. A LOT cheaper than $7+ bux a 1/2 foot.... Quote Link to comment Share on other sites More sharing options...
Ferd/289 Posted February 3, 2007 Author Share Posted February 3, 2007 thanx, got it. Ferd Quote Link to comment Share on other sites More sharing options...
Tony D Posted February 4, 2007 Share Posted February 4, 2007 "Polyflo" is a trade name for the stuff. McMaster Carr has it as well, and they ship stateside for you remote people... If you are in L.A. McFadden-Dale in Anaheim (LaPalma and Red Gum) has it---just north of the 91 FWY at Kramer/Glassell exit) They also have a web store now as well...which shocked me when I saw the sign. They have a full selection of Legris and Push-Lock Tubing Fittings as well. Nice thing about McF-D is that it's out on the floor---touchy-feely guys can mock stuff up and try out flexibility, etc. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.