JDM RICE Posted December 4, 2007 Share Posted December 4, 2007 What are you guys using as far as radiators for your RB? I'd like to keep both inlets on the left side to keep everything clean. I was thinking about using an S13/S14 Radiator used for RB conversions. The dimensions are close, but I'm not 100% positive on a good fit. Are there any other direct options that I can think of? Quote Link to comment Share on other sites More sharing options...
khoyos Posted December 4, 2007 Share Posted December 4, 2007 i'm using OEM R32 GTS-T on my RB25DET Z31 Quote Link to comment Share on other sites More sharing options...
JDM RICE Posted December 4, 2007 Author Share Posted December 4, 2007 i'm using OEM R32 GTS-T on my RB25DET Z31 I've thought about using an R33 spec radiator as well. you got any wider pix? Quote Link to comment Share on other sites More sharing options...
BirdmanZ Posted December 4, 2007 Share Posted December 4, 2007 http://forums.hybridz.org/showthread.php?t=120566&highlight=radiator+rb Quote Link to comment Share on other sites More sharing options...
JDM RICE Posted December 4, 2007 Author Share Posted December 4, 2007 word! good lookin out, just what I was looking for, the SEARCH didn't work as well for me as it did for you Quote Link to comment Share on other sites More sharing options...
triple B Posted December 4, 2007 Share Posted December 4, 2007 so did you have any clearance problems or any major modifications to get the R32 radiaator in? Quote Link to comment Share on other sites More sharing options...
khoyos Posted December 5, 2007 Share Posted December 5, 2007 i dunno if this helps clearance issues? well, some part of the front frame had to be cut, my hands cant reach the drain plug(can only drain if i remove radiator), everything fits with less than half inch clearance. apart from that, its fine. ran in sepang circuit trackday with ambient temp of 40 deg C, track temp much higher and the water temp is where it's supposed to be. so i bet it would be fine in the States where its much cooler... Quote Link to comment Share on other sites More sharing options...
chrism Posted December 5, 2007 Share Posted December 5, 2007 PRC custom double pass radiator. Made to fit the radiator support and have the inlets on the right side. Also can get it with a fan shroud that helps with cooling. I will worn you that it took several months before they shipped mine. Quote Link to comment Share on other sites More sharing options...
scottyMIz Posted December 7, 2007 Share Posted December 7, 2007 i have a ron davis radiator for the l28et in mine still and have had no problems with over heating, if you want pics let me know i'll get some Quote Link to comment Share on other sites More sharing options...
jerryb Posted December 7, 2007 Share Posted December 7, 2007 I bought a rad off ebay from this outfit. also picked up an electric fan and nice aluminum shroud....and brackets. It was less than $500 including shipping. I'm VERY happy with the setup. Great quality, performance and value. http://cgi.ebay.com/ebaymotors/19-X-24-DOUBLE-PASS-ALUMINUM-RACE-RADIATOR-LH_W0QQcmdZViewItemQQcategoryZ33602QQihZ020QQitemZ300176899553 http://cgi.ebay.com/ebaymotors/Aluminum-Radiator-Side-Mounting-Brackets-Weld-On_W0QQcmdZViewItemQQcategoryZ33602QQihZ020QQitemZ300177255367QQtcZphoto Quote Link to comment Share on other sites More sharing options...
JDM RICE Posted December 20, 2007 Author Share Posted December 20, 2007 I ended up buying the Griffin model from Summit Racing since lead times for shipping for the PRC model is unknown. Instock and 2-Day Air shipping was only $26, or you can do your standard ground shipping which is free. http://store.summitracing.com/partdetail.asp?autofilter=1&part=GRI%2D1%2D28182%2DX&N=700+0&autoview=sku Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.