serx93 Posted August 13, 2008 Share Posted August 13, 2008 What if I made you guys some prints of the brackets, and of the cut length of the bar, this way you could make your own with whatever means you have. It would really be much cheaper, and keep with the spirit of this forum, building hybrids. Have you given any more thought to selling these prints? Quote Link to comment Share on other sites More sharing options...
Miles Posted August 14, 2008 Share Posted August 14, 2008 see my thread http://forums.hybridz.org/showthread.php?t=126175 Miles Quote Link to comment Share on other sites More sharing options...
The Woj Posted March 6, 2011 Share Posted March 6, 2011 Bump!!! I am going to make one of these bars to mount 5 pt harnesses in my car until which point I decide to put a cage in. I noticed that the OP used .25" plates for the mounting points, I only have .12" and .33" stock on hand. I spent 1.5 hours making a 14" cut in the .33" steel with a 3" cut off wheel before I decided it was way too thick. It seems to me that .12" would be a good thickness for these mounting plates, especially since they are only mounting to 20ish gauge body steel. Am out of line? Does anyone disagree? Quote Link to comment Share on other sites More sharing options...
chrismiller5157 Posted March 6, 2011 Share Posted March 6, 2011 Awesome read, nice work on the harness bar. True backyard special! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.