Larger Master cylinder ?

[Ont240]

Other than the ZX master cylinder, Is there another larger bore Master cylinder that will bolt up to the s30 series booster (1973)

[EMWHYR0HEN]

You might might to check the archives. I think someone mentioned using a 1'' MC from a Niaasn hardbody pickup.

[zcarnut]

There is the Wilwood 1†diameter master:

 

http://www.wilwood.com/Products/006-MasterCylinders/008-CRTMC/index.asp

 

and:

 

http://www.wilwood.com/PDF/ds439.pdf

 

Because it is a “vertical mountâ€, it fits the S30 boosters. However, you will have to swap the outlet ports to match your metric lines.

 

I am using a 1†master from a Hardbody truck on my 260Z. But I am using a 1983 ZX booster which has a “horizontal mount†for the master. The ZX booster only fits the 1974-78 Z cars.

[Ben]

Nissan Patrol - 1968-69? (can't remember which), is a 1" cast MC (PN# JB1419).

 

I'm running one on my '73, with a Willwood prop-valve.

The pedal is pretty firm with the S12 callipers, I'm expecting it to be a little softer with the S12W's since they have the larger piston volume.

[Ont240]

Steve, Is it possible to be more specific as to year & model specific eg

4wd, V6

Here in Canada they show 5 different ones with a 1" bore for the 87-97 hardbody D21

Thanks

[zcarnut]

Steve, Is it possible to be more specific as to year & model specific eg 4wd, V6...

Here in Canada they show 5 different ones with a 1" bore for the 87-97 hardbody D21

Thanks

 

I agree that attempting to find the Nissan part number for the 1†diameter truck master cylinder is very confusing (been there, done that). However, the 1993 V6 SE King Cab Hardbody Truck uses the 1†master (at least here in the USA).

[Ont240]

I agree that attempting to find the Nissan part number for the 1†diameter truck master cylinder is very confusing (been there, done that). However, the 1993 V6 SE King Cab Hardbody Truck uses the 1†master (at least here in the USA).

 

Thanks

[Six_Shooter]

There is the Wilwood 1†diameter master:

 

http://www.wilwood.com/Products/006-MasterCylinders/008-CRTMC/index.asp

 

and:

 

http://www.wilwood.com/PDF/ds439.pdf

 

Because it is a “vertical mountâ€, it fits the S30 boosters. However, you will have to swap the outlet ports to match your metric lines.

 

I am using a 1†master from a Hardbody truck on my 260Z. But I am using a 1983 ZX booster which has a “horizontal mount†for the master. The ZX booster only fits the 1974-78 Z cars.

 

The way you wrote that sounds like the S130 (ZX) master won't fit the S30 booster. According to the FAQ (LINK) There are two different ZX masters, one produced from '79 to '81 that has a vertical mount and the other from '82 to '83, that has the horizontle mount.

 

I just may have to keep the master from the 280ZX I just got for parts.