carbed 350 to tpi setup

[rdsk8ter]

A really good buddy of mine is converting a carbed 350 to a tpi he says there is a book to do this out there but I am hoping that you can find me a free version online I have searched but am not as good as alot on finding this stuff.

[SHO-Z]

Here is the book on the subject.

 

http://www.jagsthatrun.com/Pages/Chevrolet_TPI_TBI_V-8.html

[dr_hunt]

Well it isn't free, but I'd bet that is the book to have in reference to the z. I ordered it myself.

[grumpyvette]

thinking of swapping your carb to a TPI system?

this should help but keep in mind that the TPI produces good torque and good mileage but the intake design restricts air flow rates with the stock intake components above about 4500rpm, so its ment for cruising and low to mid rpm torque not peak hp

 

http://www.amazon.com/Chevy-Injection-Swappers-Guide-Design/dp/1884089127/ref=sr_1_1?ie=UTF8&s=books&qid=1229366591&sr=8-1

 

http://forum.grumpysperformance.com/viewtopic.php?f=32&t=596

 

http://www.darklair.com/monte/howto/howto.TPI_swap.html

 

http://www.edgesz28.com/edgesZ28/suburban/suburban-tpiswap.htm

 

http://chevythunder.com/

 

http://forum.grumpysperformance.com/viewtopic.php?f=32&t=168

 

http://sethirdgen.org/tpi1.htm

 

http://www.rowand.net/Shop/Tech/GMTPISwap.htm

[gvincent]

How about a modified LT1 intake manifold?

There are a couple of people making these, I don't know that much about them except that it flows a lot better than the TPI set-ups.

Check out this for some pictures

http://s280.photobucket.com/albums/kk197/aholzhaus/

Greg