jacob80 Posted March 20, 2009 Share Posted March 20, 2009 Hey guys, I believe there is an O-ring that seal the oil filer housing that has the fitting that run the lines to the oil cooler. I have lost this o-ring and was wondering where I could find another one. Thanks! Quote Link to comment Share on other sites More sharing options...
ezzzzzzz Posted March 20, 2009 Share Posted March 20, 2009 Find a hydraulics service business in your area. Another option would be a 'power transmission/bearing' supplier. Quote Link to comment Share on other sites More sharing options...
jacob80 Posted March 20, 2009 Author Share Posted March 20, 2009 Alright just found the old one, sorry. I think we'll see if we can make this work. For temporary, we're not running an oil cooler and instead, just looping the input and output together. Thanks guys Quote Link to comment Share on other sites More sharing options...
ezzzzzzz Posted March 20, 2009 Share Posted March 20, 2009 I always find those missing parts after they've been replaced. Of course, I also find every other part I will use later on but it goes missing when I need it. Quote Link to comment Share on other sites More sharing options...
HowlerMonkey Posted March 21, 2009 Share Posted March 21, 2009 Same dilemma here. Quote Link to comment Share on other sites More sharing options...
ShinyRedZ Posted April 1, 2009 Share Posted April 1, 2009 There are 2 o-rings in the adapter. The large o-ring seals the adapter to the block, and is Nissan part 21334-R2400. The small o-ring is inside the adapter, seals the bolt that goes through the adapter, and is Nissan part 21311-V0700. I got both of these o-rings from the Nissan dealer in Dearborn, Superior Nissan. Quote Link to comment Share on other sites More sharing options...
nismopick Posted April 1, 2009 Share Posted April 1, 2009 I was looking for one last fall. My local Nissan parts guy said there were "maybe" two in the USA, one back East & one in Cali. Instead of waiting two weeks for a definite answer, I rummaged through some of my gaskets and found that one of my used 325i oil filter o-rings works like a champ. Cut to size & use a dab of RTV. Quote Link to comment Share on other sites More sharing options...
evildky Posted April 1, 2009 Share Posted April 1, 2009 uh yeah, I wouldn't trust the cut O ring, I bought a new one from my local machine shop, they had to order it, and I had to buy a pack of 5 but the total cost was only like $12 dollars with shipping and tax Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.