Jump to content
HybridZ

rt260, BMW M Powered


Recommended Posts

  • 2 weeks later...
  • 11 years later...

Hate to drag this thread back from the dead, but im currently doing this swap on my z with a 2.8 m52. Got a friend building the mounts now off the drawings you posted, was wondering if you had anything on the revised trans mount pictured later in the thread using bmw trans bushings. Seems simple enough to fab up but shop space is limited at my buddys shop so anything i can get fabbed off of drawings helps me keep the project moving while i wait. 

Either way this is an great build and cant say thanks enough for sharing those drawings with the community.

Link to comment
Share on other sites

  • Administrators
6 hours ago, HellrotS30 said:

...was wondering if you had anything on the revised trans mount pictured later in the thread using bmw trans bushings. 

I don't recall making a "revised" mount. Are you talking about the mount katokid posted a picture of? That would be his build and his solution. I don't have any information on it beyond what he posted.

Link to comment
Share on other sites

After reading back through his threads i saw it mentioned that your mount brackets were intended to be used with e30 325 engine mounts, is that correct. I had just assumed e36 so wanted to be sure. 

Link to comment
Share on other sites

  • Administrators

In the upper right hand corner of the prints, there are notes in the title block for 1995 BMW 325 isolators.

 

image.png

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...