pat1 Posted November 25, 2009 Share Posted November 25, 2009 So do you have any final pics for all those looking to get one later. I have had 5 people asking me about that 200zr pan I had and I directed them to come on here and check out your work. I'll get some pics in a few. I scratched the paint and I wanted to repaint it. Just wanting for the paint to dry. Quote Link to comment Share on other sites More sharing options...
pat1 Posted November 25, 2009 Share Posted November 25, 2009 final pics. This pan came out great. I'm very impressed with it. The baffles are going to work like a dream. I wish put this pan on my RB. RKlamb123 it has been a pleasure to build this pan for you. I'm looking to build more, if any of you guys need one just let me know. thanks Patrick Quote Link to comment Share on other sites More sharing options...
pat1 Posted November 25, 2009 Share Posted November 25, 2009 more Quote Link to comment Share on other sites More sharing options...
RKLamb123 Posted November 25, 2009 Share Posted November 25, 2009 So any idea how much oil it holds. Quote Link to comment Share on other sites More sharing options...
pat1 Posted November 26, 2009 Share Posted November 26, 2009 So any idea how much oil it holds. between 5-5.5 qts Quote Link to comment Share on other sites More sharing options...
Ricky Ricer Posted November 27, 2009 Share Posted November 27, 2009 What mods would need to be done to the 200zxr pan for the pickup? Let me know on a price! Quote Link to comment Share on other sites More sharing options...
pat1 Posted November 27, 2009 Share Posted November 27, 2009 What mods would need to be done to the 200zxr pan for the pickup? Let me know on a price! what motor?is it a awd block? Quote Link to comment Share on other sites More sharing options...
wax Posted November 27, 2009 Share Posted November 27, 2009 Rb26dett Quote Link to comment Share on other sites More sharing options...
Ricky Ricer Posted November 28, 2009 Share Posted November 28, 2009 what motor?is it a awd block? RB26DETT. I already have the RB20 pan, just no pickup. Quote Link to comment Share on other sites More sharing options...
pat1 Posted November 29, 2009 Share Posted November 29, 2009 pm sent Quote Link to comment Share on other sites More sharing options...
RKLamb123 Posted December 1, 2009 Share Posted December 1, 2009 Hey Pat the pan fit great and the pickup was dead on but I just realize something. My block does not have the spot to put the oil pick up in the back. Any suggestion anyone. Quote Link to comment Share on other sites More sharing options...
pat1 Posted December 1, 2009 Share Posted December 1, 2009 Hey Pat the pan fit great and the pickup was dead on but I just realize something. My block does not have the spot to put the oil pick up in the back. Any suggestion anyone. Do you mean the pick up brace? You don't have a 8mm hole in you main cap. Quote Link to comment Share on other sites More sharing options...
RKLamb123 Posted December 1, 2009 Share Posted December 1, 2009 Do you mean the pick up brace? You don't have a 8mm hole in you main cap. Sorry about that my brain was on lock up on that one. I meant to say that I do not have a spot for the dip stick. I seen on some blocks they have a plug on the rear part of the block. Mine does not have that. So any suggestion on how to get a dip stick/ Quote Link to comment Share on other sites More sharing options...
pat1 Posted December 1, 2009 Share Posted December 1, 2009 Sorry about that my brain was on lock up on that one. I meant to say that I do not have a spot for the dip stick. I seen on some blocks they have a plug on the rear part of the block. Mine does not have that. So any suggestion on how to get a dip stick/ Are you sure there is no hole that is plugged up? Both of my rb's had them. it should be on the intake side. How are the guys doing it with the rb20 pans on the rb26 blocks. If I would of know it I would of put a dipstick holder on the side of the pan. The worst case just send it back and I'll put a dipstick on the side of the pan. Don't worry I'll take care of you. As my dad use to say there is more than one way to skin a cat lol:mrgreen: Quote Link to comment Share on other sites More sharing options...
RKLamb123 Posted December 2, 2009 Share Posted December 2, 2009 Yeah that is what I thought too. But this engine is out of a 98 Stagea so there is no plug on it. I was like dam. I see the spot where it was suppose to be but it is solid. I will ship it back tomorrow I guess. Hey can you make a steel braided power steering hose. I have the 300zx Z32 and my power steering was on the passenger side. So now I need to get it on the drivers side. Someone said I could bend the current hose to make it work or get a steel braided one made. I rather just do it right and get it over with. lol Quote Link to comment Share on other sites More sharing options...
pat1 Posted December 2, 2009 Share Posted December 2, 2009 Yeah that is what I thought too. But this engine is out of a 98 Stagea so there is no plug on it. I was like dam. I see the spot where it was suppose to be but it is solid. I will ship it back tomorrow I guess. Hey can you make a steel braided power steering hose. I have the 300zx Z32 and my power steering was on the passenger side. So now I need to get it on the drivers side. Someone said I could bend the current hose to make it work or get a steel braided one made. I rather just do it right and get it over with. lol I don't have the tools to do a powersteering hose sorry. That's wierd about the dipstick hole. Are you sure it is solid ? There isn't a steel plug in the hole. Have you tried to use a punch to get it out. I can't see nissan making different blocks for different cars. Can you drill out the hole? Quote Link to comment Share on other sites More sharing options...
RKLamb123 Posted December 2, 2009 Share Posted December 2, 2009 Yeah thats what I thought too but all the pics I have seen shows a plug back there and I dont have none but I will check again. Quote Link to comment Share on other sites More sharing options...
amorfin Posted December 2, 2009 Share Posted December 2, 2009 Not all blocks are drilled on the rear. You can just have the hole drilled, as you said it is clear where it was supposed to be, and tap the front one. Many people do it. Quote Link to comment Share on other sites More sharing options...
RKLamb123 Posted December 2, 2009 Share Posted December 2, 2009 Yeah there is not much room there to work with. Dam Nissan why they just cant make everything the same way. Well so far I have broke two bits today. I guess I need something stronger. I will keep going at it. I was wondering would putting the dip stick in the pan cause any drop in oil pressure. Quote Link to comment Share on other sites More sharing options...
pat1 Posted December 3, 2009 Share Posted December 3, 2009 Yeah there is not much room there to work with. Dam Nissan why they just cant make everything the same way. Well so far I have broke two bits today. I guess I need something stronger. I will keep going at it. I was wondering would putting the dip stick in the pan cause any drop in oil pressure. Get some nice Carbide drill bits and work in steps from small to big. The key to drilling metal is going very slow and taking your time. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.