At the moment I'm not a Z owner but I do still own "L" engines and I'm still running one in my S13 240SX coupe, we all know it's hard to find a rust free first generation Z body.
I had to take a break away from making custom parts to focus more time on my career as an automotive tech.. I have been working as a tech. since 1993, I love it and it pays the bills. I make custom parts in my spare time just to help you guys with your projects.
I've received plenty emails about fuel rails while I was away working my butt off for Toyota. Some of the emailers were almost demanding that I get things in order to make custom fuel rails once again. well I'm not 100% back to where I can take orders from my site but I am making rails in batches at the moment. Time will be directed towards my site after I finish the few business trips I have to take in April. Till then just watch for the rail batches I'm making and send me an email if you want me to run a batch of a certain rail.
Here is the thread I started when I started to make batches of rails last week.
Some pics of my work.
I offer custom rails for the "L" engine in 3 flavors:
1)Barb style: This rail is for using with your stock barbed/hose type of injectors including the cold start injector.
2)11mm style: This rail is for using injectors that have an 11mm upper O-ring like DSM, RX7 and supra injectors.
3)14mm style: This rail is for using injectors that have an 14mm upper O-ring like bosche, ford and GM injectors.
Every rail is sold with:
Custom bent mounting brackets.
Stainless mounting hardware.
Brass barbed end and injector fittings where needed.
I will update this thread as often as possible and I look forward to helping you with your project.
Edited by pallnet, 23 March 2011 - 06:08 PM.