-
Posts
403 -
Joined
-
Last visited
-
Days Won
1
Content Type
Profiles
Forums
Blogs
Events
Gallery
Downloads
Store
Posts posted by wickiewicked240z
-
-
I got a gallon of RUSTBULLET I did the whole inside of the 240z the bottom, the inside of the doors, i also used etching primer as a base for the rustbullet and i used PPG epoxy primer. and i used GATOR GUARD as my under coating, and for the inside of my front fenders.. Rustbullet was about $100 a gallon i used 1.
-
would 1 quart be enough to coat the 240z gas tank:?
-
They quoted me $360 dollars to seal the 240z gas tanks and clean and paint the out side. I think is way to much money. I think I might do this myself as for fuel tank sealers system which do you guys recomend and how much sealer would i need for the 240z gas tank. here are some brands im thinking of buying
http://http://www.kbs-coatings.com/KBS-Auto-Fuel-Tank-Sealer-Kit-P88C38.aspx
price$57.oo
or
http://http://www.por15.com/bSPECIAL-Quart-of-Fuel-Tank-Sealer-Quart-of-Metal-Ready-b?sc=2&category=180
Price $42.45
or
-
I used a cut off wheel to cut the hood when i installed my 280zx hood vents. and take your time allow the metal to cool down
-
Heres the motor with valve cover,intake and the throttle shafts and fuel lines
-
Just picked up my intake, valve cover and balance tube from the polisher. Total cost was $135 less than a week turn around
RIVERSIDE WHEELS
8990 Cottage ave. Suite A
Rancho cucamonga, CA 91730
(909)989-1267
ask for Alfy
Here are the pictures
BEFORE:
AFTER:
-
the good old days of removing the rust. same techniq i used when replacing the door pillar rust holes
-
delete please
-
Those are pictures from the website they don't have any bigger ones. Heres the link japanese to english..
http://www.google.com/translate?u=www.aritaspeed.com&langpair=ja%7Cen&hl=en&ie=UTF8
-
$5,000... I lost track I think i got over $6,000 and im still not done. Tools are pretty pricey
If you go stock $5000 is pretty good but adding new parts aftermarket parts get's very expensive.
-
G nose
Front bumper spoiler ¥36,750--$298.72
Rear bumper spoiler ¥42,000--$341.35
Side step 1SET¥47,250--$384.03
G nose ¥47,250--$384.03
The porsche type rear wing¥26,250--$213.32
S130
◆S130◆
Front bumper spoiler
Rear bumper spoiler
Side step
Set price
¥84,000
$682.64
-
-
those side skirts are made by YAMATO Inc.
flares are ZG flares. and im looking for the front air dam
-
no powdercoat just regular high temperature paint only the side were painted not the top of the block
-
Before
AFTER
Only the head was rebuilt since it had bad valves. and the block was cleaned from all the oil resedue and i removed the carbon buildup on of the piston.
-
Over 500 race vehicles participated
-
Heading back Here are some scenic pics. I saw a bad accident after the second toll booth i think the people in the car died a saw some woman laiying on the front seat , air bad deployed and white cloth over her...
-
-
-
On these pictures i manage to get closer to the action since there were less security trying to keep you from getting hit by a car.
-
ROBBY GORDON
This picture below is Robby Gordon nascar driver/baja racer sorry for the crappy pic.The helicopter pic is his personal media coverage that follows only him around the 500 miles of the race.
-
-
-
Here are some pictures I took at the baja 500 in ensenada, baja california June 2, 2007. Some of the pictures are not that great they were going so fast.
Sayonara HybridZ
in Body Kits & Paint
Posted
thanks for the great info, before i started my project i always felt that your post were very helpful.