-
Posts
191 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Events
Gallery
Downloads
Store
Posts posted by Drift Boss
-
-
I have a walbro 255 inline pump. With a stock Nissan 240sx fuel filter all mounted out back by my gas tank.
-
Oh, I am taking apart my sub axles. One has run out. Taking it to a very good lathe operator to true up the flange for me. (Bearings are fine, wheel wobbles, and has a vibration at 6th to 100mph)
-
-
-
Not sure yet. It's just a little gas beater that gets me around town.
I think me and a buddy are moving to Japan sometime this year. So I might be selling the s30 when I leave =/ or before I leave.
Anyways, the previous owner installed Subaru axles, and made these fine gem adapter plates. Needless to say, I am grinding them down now and really welding them...I am not welder, but I can weld better then this garbage.
Sorry I think my camera couldn't focus, to much shitty weld might have broke it. =)
-
-
I found a ignitor on facebook. Not sure what the noise filter is?
I will have to take pics when I am around the fuel line.
-
-
-
-
-
-
-
I cut the oem line. You will see the banjo bolt has a hard line. Simply cut the hard line and put a fare tool on the end. Install your soft hose, bam. Done. =)
-
It's going off to a shop to get the piping made and the vband couplers welded on.
Over kill?
-
I will have to measure it again. You're not the only one that asks that lol.
As of right now, no tune. Garrett gt40 on 10psi, seems to be doing fine, but I do not get on it. Waiting for a buddy in Japan to source me a Apexi power fc. Ideally I would want aem, or ecu masters stand alone...but you know, limited only by money.
Anyway, here is my couplers. =)
Next parts I am getting is
Id1000 injectors
Aeromotive fpr
Bigger fuel lines
2x DW 350 inline fuel pumps
1x daul fuel pump holder
Fuel rail with an fitting welded in middle
And...a apexi pfc.
Should wake up this old 1jzgte. =)
-
-
-
-
-
-
-
-
Also put in 370z floor mates and oem 240z steering wheel =)
2jzgte swap questions
in Toyota L6 Forum
Posted
Cxracing mounts....
Here is the run down. (PPictures in my build status) I had a problem with them not setting the engine all the way back. I also had a problem with them falling over....like one would push the other one and make my engine set weird. After about the 10th time going in and re tighting them up... I ended up just welding them to my 280z subframe. DoNE. Never had a issue sence.
I highly suggest the wiring spec harness. I know it's some money...but differently worth it. I wired in 2x 1jzgte to other cars (240sx and a supra) neither I enjoyed doing... I have wired many rb series and Sr series engines. Cake compared to wiring a jz.
Oh, and yes stock ecu, stock injectors at 10psi never giving me issues. It's daily drivable this way, BUT I would not go out to drift events like this. Hope you catch what I am implying. (I suggest tuning)