Jump to content
HybridZ

Redwine automotive

Members
  • Posts

    36
  • Joined

  • Last visited

Everything posted by Redwine automotive

  1. On the GTO vats is part of the bcm you will need to have it programed out of your pcm.
  2. I got my 71 for 600.00 its was a 1 owner and parked in the garage since 1983. 8000.00 later still on the rotisserie but getting close to coming off
  3. You can swap your stock temp sender to the LT1 and i think early gm is a green wire.
  4. Any bulb will work,one side to fused key on power and pin 9 of the blue connector. Let me know what else you need. -
  5. What kind of scanner are you checking codes with ,the generic obd may not see all the codes .
  6. Add me a blue and a gray short t to my order so we can get this going.
  7. If they are to short, could you make a short strut tube that would slip inside then we could weld to,and it would fit anybodys coilover made for 240 strut tubes
  8. Mills throwing tools across the shop is always fun stuff. Hey Will what do u think about the B.C coilovers,lots of work or easy ?
  9. you can not solder the cast ones but you can get crimp on kind that can be.
  10. Yes it does, with headlights on pull and twist battery cables,when lights come on you found your problem.
  11. If it resets every 30 sec you might have a circut breaker.Maybe installed when it was hybrid,look for changes in the harness. Do you still have a fuse link wire at starter
  12. Sounds like you are loosing main battery power or ground. check both cables very well . turn on head lights after trying to start and see if they work, if not try moving moving both cables around.
  13. Count me in. Pm sent. I'm using b.c. Coil overs. Any adjustments for that?
×
×
  • Create New...