209runner

oops wrong link this is it the right one http://sacramento.craigslist.org/pts/3098592703.html

Give this guy a call. I've bought a lot of parts from him. He is from Sacramento and parting out a few s30's. This is his craiglist ad. 2pd2m-3125704413@sale.craigslist.org

I use to live in stockton but I moved to elk grove a few years ago. Are you from stockton? I had the car at my buddies shop for his car show at autosport the first weekend of June if thats why your asking.

They fit fine with no spacers but in the picture there is a 10mm spacer to push the wheels out. The front hubs are from a z31 so they push the wheels out I think about 12-15mm over the stock 240z hubs. So if you have the 240z hubs you'll have to run spacers. I've also got the megan coilovers too so my back spacing is going to be a little different.

The wheels are not staying on the car. They are nice but I do want a more aggressive wheel. I've got a set of watanabe rs8 3 piece wheels that I'm going to have rebarreled to 17x10 & 17x11. Yeah I like the deep dish too. It should have a 5" lip up front and 6" in the rear.

sorry to burst your bubble but I've got a set in that size and offset but in 5x114.

can you just email the pictures? son209@hotmail.com

I'm looking for a rear bumper for my 240z. LMK if you have one and how much.

still working on it but she runs.

For the rears in my car I had the Megan top hats redrilled to match the stock ones so they would just bolt up. I didn't want to cut and weld in the plates in the rear.

$40 plus shipping. Message me your email address and I'll send pictures.

Anyone in the Sacramento area cutting up a shell? I could use a new roll pan for my 73 240z.

I am interested in the regulator but I had another member PM me and I want to get some other things from him to. If it doesn't work out I'll let you guys know.

I need a passenger side window regulator for my 73. The previous owner thought a set of vise grips would work better than the factory handle and damaged it. Anyway let me know what you got and how much shipped to 95757

I've been trying to find a set of those rear flares too. If you find any info on were to buy a set lmk too.

Just so you know the 73 is different than all the other years. It uses different plugs from the engine harness to the dash harness.

I'm pretty sure I have those parts. I've got 240z & 280z gauges. I just have to make sure. And I'm local.

to center the rotor between the brake caliper.

I guess I'll try the 84 turbo rotor then. Now I just need to buy or make the 35mm spacer.

I'm getting all the parts together to do a 5 lug swap on my 240z. I all ready know what to do with the rear but the front has me a little stumped right now. the hubs that I have are from a 5 lug z31 but I need to order new rotors. Are the turbo and non turbo rotors different? My think my hub came from a 86 non turbo 5lug but I'm not sure. when I bought it I thought all the 5 lug z31 hubs where the same. But when I started looking up the rotors I got a couple different part number. My question is which one and what year car do I buy it for or are they all the same? I'm currently running the vented rotor and toyota calipers.

The intercooler is still in front of the radiator so i'm not to concerned about heat soak. I wanted to keep the pipping short as possible. I don't really have the profec/controller mounted yet. I'm going to do some fiber glassing in the dash to put a double din NAV and spots for my air/fuel gauge and oil temp gauge. Onces I do that then I'll make room for the profec & a turbo timer in the same area.

I've been building it for the past three years. I've maybe put 80 miles on it including the 50 I drove it today. Its my play car. I have a lifted 4runner that is my daily.

Thats good to know. this is my first turbo car so its all still pretty new to me. I still don't really even know how to do all the stuff on the profec. It came out of my buddies car because he thought it was to complicated. Once I actually drive the car I'm sure I'll figuare it out. But thanks for the info.

Thankyou.

I'm running a greddy profec b II boost controller and I ran across a problem. I unpluged the wires to the boost controller soleniod and didn't realize that the idiot that put the connector put the same connector on both sides of the wires. Now I don't know which wire plugs into each other (they cut the plugs that greddy put on). the solenoid has a red and black the wires from the boost controller is white and green. If some could tell me or post a picture of the harnesses plugged into each other would be great.