Jump to content
HybridZ

voltron_boi

Members
  • Posts

    262
  • Joined

  • Last visited

Everything posted by voltron_boi

  1. Okay new update. I was reading some through some form here and was managed to get more information about fig. a pix. the red box plug, there is 4 wires. 2 green and 2 white. The 2 white wires are “hot when on” and the other one is the “start signal”. In order to know which wire is which I will need a multi-meter to find out which white wire it is. As for the 2 green I don’t know what they are. so anyone that has into to it please reply.
  2. check these out http://forums.hybridz.org/showthread.php?t=149253
  3. fig. A Okay, I managed to pick up some more details about the harness swap from other members. I forgotten to pull off the relays from the owners 75 280z. But today I was at the junk-yard and managed to pick up the missing relays. Now I’m stuck with some wires from the end connectors from the computer in figure A. I believe that the “box red†I had mark is what I need to wire into my 74 ignition key wires. Now I don’t have a clue where I should hook up these wires, “box green†plug and the 2 white wires from the “black boxâ€. my question is, does the “green box†and the “black box†wires need to be hook-up, or just leave it as is. So anyone please help.
  4. Hi hybridz members, I just pick up a early white 74 260z. The owner had sold the motor with transmission, and everything else is still attach. The other day I just pick up an full swap from n/a 75 280z that came with engine harness, computer, amf, intake plus intake box. I know that almost everything from the 75 will bolt into my 260, but not unsure if the 75 harness will bolt into the 260 since it's a carburetor setup. I was talking to my friend the other day and he told me that I will need to wire the ignition wires from the 75 harness into my 260 ignition, then will need to wire up the fuel pump, then I should be able to start the car. I have search and seen many for the l28et swap, and nothing so far about what I'm looking for. So anyone, please confirm if my friend is correct? Plus anyone who experience in the swap or know any information about it, can please help or direct me to a link that will answer my question. I just want to get my facts straight before I start the swap. Thanks
  5. anyone has this oil pan around? new or used let me know, i would like to buy it. please pm me. thanks
  6. thanks, i think im going to pass on this one. im looking for a block so i can rebuild it. the most im willing to pay is $500.
  7. Is it in nor-cal? Dont want to drive more then 200 miles just for a long block. Do u remeber the URL for it?
  8. I'm looking to buy a 1979-1983 280zx l28et turbo motor. I will be happy if it's a running motor but don't mind if it doesn't run, because I will be rebuilding it. If no long block then that's okay, a short block would be fine also, as along as the block still turn over. I live in the Sacramento area and would travel 200 miles to pick up the l28et. Anyone?
  9. This summer im planning to swap a rb25 into my 74 260 that already have factory ac system in it. It's going to be my daily commute car for the summer. I was just wondering if any z rb has hook up ac in their car. My question is are their any custom fabbraction need to be done to the lines? Or is it a bolt on? Please reply.
  10. Hi I was just wondering if anyone in here will know any shop in california norcal that carrys sportmax. I prefer local in Sacramento if anyone know. I'm not willing to drive Down socal just to pick up a set of sportmax. Anyone?
  11. Hello everyone I am missing 2 banjo bolts from doing my swap. I was just wondering if anyone know where I can get the 2 missing banjo bolts that I had attach. The missing bolts are the one that I mark red. Please if anyone have it or know where I can get them please let me know so I can fishing my turbo lines. I have search everywhere and no one seem to have it. Thank you hope this help,
  12. since you are making one. can you make me one also? ill pay you and pay for shipping for it. let me no, thanks
  13. I'm currently doing the rb26dett swap, and would just wondering if anyone know where to buy the y steel pipe or aluminum pipe. I'm looking to do my setup like these 240z. Let me know where i can find the y-pipe, thanks
  14. Hi anyone have any coilover that will fit my 75 280z. I would like to take it off you hands. Please pm me and let me know. thankyou
  15. Thanks to eric(stealth-z), I decide to go with his twin plate ocr setup. The ocr setup looks great, and I will post picture of it later today.
  16. I'm getting my flywheel today, and was thinking that since im getting a new flywheel, I'll as will get a new clutch kit. So I came upon to a clutch brand name "spec" and wadnt sure if its good or not. Has anyone try them out? Looking to get a stage 3 clutch kit.
  17. 240z master is that a rb20 fidanaza flywheel. Are u using the 300zx(z32)n/a cluch and Pressure plate? Will that bolt onto the rb25 transmission?Just want to confirm with my cousin.
  18. I would also want to know about this. That's what im thinking of getting. Anyone?
  19. Does quality matters when it comes to lighten flywheel? I'm still debating if im going to get it. I need more advice?
  20. im looking to buy a rb25det lighten flywheel, and i came across this flywheel on ebay, and i'm just wondering if anyone in here, or know anyone that had used this flywheel before. any other suggestion on lighten flywheel that would be best to buy? here is the link to the flywheel on ebay. http://cgi.ebay.com/ebaymotors/RB-Performance-Light-Flywheel-RB20DET-RB25DET-RB26DETT_W0QQcmdZViewItemQQ_trkparmsZ72Q3a1205Q7c66Q3a2Q7c65Q3a12Q7c39Q3a1Q7c240Q3a1318Q7c301Q3a1Q7c293Q3a1Q7c294Q3a50QQ_trksidZp3286Q2ec0Q2em14QQhashZitem120360625449QQitemZ120360625449QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories
  21. Is it hard to do that, or is it very easy. If it's easy and doesn't cost that much just to do it then I will love to do it. By any chance is their a form that will tell me how to do it?
  22. Hi, I'm going to be picking a brand new set of ground control and a set of kyb shocks for my 75 280z next weeknd. I am just carious if any modify is needed to be done onto the car inorder to make the coilover work, or will everything will just bolt on with no modify. If it requires work to be done then, I won't be getting the set. So please anyone help?
×
×
  • Create New...