88dangerdan

The '08 GMC billet grille is fastened with 5 screws right over the OEM grille that has the GMC logo it's part of the upgrade package and considered OEM not that it matters for what I did. The cuts I had to make were 1" inward on the top on both sides, and 13 slats down. Then found center where my bumper struts lined up and cut 2" diameter hole. I had the struts off so I could come through at an angle so as to keep the hole smaller. Then made a couple of L brackets that screwed in the same hole the original grille did.

Well she finally found her way to my driveway. Father and son tare down project. A list of available parts will be up soon.

Yeah I like it better with the bumper. Thanks Dom Daniel

Thanks

It only took an hour to get it to look like this from this Then it took about another hour to get it to look like this The grille is off of a '08 GMC 1500 and only cost me $20 So you got two choices, but if you choose second one can't go back without having two of these Daniel

NICE-- You can never go wrong with Silver & Black

Thanks, it's gettin thereDaniel

Wheels are just standard Koenig 15x7's with 205-60 Dunlop sport a2 nothing fancy

Yes sir, Black primer " 5 STAR EXTREME #5424 2K EPOXY PRIMER "

She's just waiting on me to make an appointment at the beauty parlor. ... any recommendations on a good paint shop here in northern California?

My 260z is a 12/73 manufactured date, as my parts car has a 5 or 6/74 manufactured date and the support brackets are as you mention

I was out visiting my 260z parts car and stumbled on this. Driver side head light protector thing-of-a-bobber. Pictures are of front and back of same piece. My 260z doesn't have mounting points so I have no need for it. If someone out there could use it to fab new pieces to benefit all I would be willing to give it up for just the cost of shipping. Thanks Daniel

Here is a pic of the rear bumper

I recently purchased a 260z parts car so pm on thing's you are looking for and I'll let you know if it's available. Thanks Daniel in Stockton Ca.

thank you, I really didn't think so but the stitching pattern look pretty close, so made me think about it. Thanks Daniel

I recently came into possession of a 260z parts car and was wondering if this material on these seats are original. If I was asked I would say no, but I am truly a newbie when it comes to knowing anything about the Z. Thanks Daniel

Thanks again for the direction

Plenty bright

Auto correct:-(

The thanks should go to sixshooter (sorry no offense socorob) Daniel

The thanks should go to subwoofer (sorry no offense socorob) Daniel

First off, I would like to thank socorob for putting the idea in my head. Here is my 3rd brake light addition. It's off of a Chevy Tahoe ( $10 @ pick-n-pull ). 1 drilled hole 2 self tapping screws small bead of permaflex all the way around before attaching ran wires inside top panel (where dome light is) down around passenger side and spliced into brake light harness. I think it came out pretty damn good if I do say so myself

ZCCJDM.com and Google 240zg has images

I now am also considering the Safari tail light idea, so thank you for the information Daniel

I like driver side , mainly because its more of a difference from the original look