ritrebor
-
Posts
159 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Events
Gallery
Downloads
Store
Posts posted by ritrebor
-
-
I got some of these Race Trailer Ramps for my tilt trailer to help with the lowered Z
Lot less weight than wood to lug around
https://raceramps.com/car-ramps/trailer-ramps-and-loading-ramps/trailer-loading-extension-ramps/
ritrebor
-
Looking for a set of 4 bolt companion flange adaptors for my 280z to 300zx clsd conversion.
ritrebor
-
There are 2 thickness of spacers depending if it is a 240z or a 280z front hub.
Don't remember the thickness for them.
ritrebor
-
Might check Greyhound Buss package express
The maximum weight per package is 100 pounds. The maximum dimensions that we can accommodate are 29" H x 47" W x 82" L
ritrebor
-
PM sent for Companion Flange Adaptors & Stub Axles
ritrebor
-
My 78 shoulder belts mount to the strut towers.
ritrebor
-
When my ignition cylinder broke I got one at Autozone.
ritrebor
-
I always thought there was only 2 different valances.
One for the 240z with cut out for turn signals and the 280z without cut outs.
ritrebor
-
What is the measurement on your piece?
ritrebor
-
Top pic is 240z
Bottom pic is 280z
Both pieces are completely different.ritrebor
-
These are the different Autopower Roll Bars that I have gone through to get the one in the last picture.
Current one has all the previous bars.
Hoop (Decal)
Diagonal (Camera)
Horizontal harness bar (Fire extinguisher)
Strap in discussion (nothing attached)
ritrebor -
I would fiberglass aluminum angle brackets to the hood and bolt the hood hinges to them.
This will give you some adjustments for lining up your hood so it fits correctly.
ritrebor
-
Don"t believe that is the harness mount. More of a seat support.
Mine has the horizontal bar the same size tubing as the rest of the roll bar.
ritrebor
-
-
Sunday in Woodland Hills from 7am to 10am there's super car sunday
http://www.supercarsunday.com/
A little of everything.
ritrebor
-
Just do what I do, and go to these early car shows and I am home before they are ready to go.
Everybody wins. LOL..
ritrebor
-
Don't know how early you are going to Huntington Beach, but every Saturday morning from 5AM to about 8Am there is Donut Derelicts car show.
Mainly hot rods.
You can see some of the cars on you tube if you search Donut Derelicts.
ritrebor
-
In the past, when I cashed a USPS money order AT THE POST OFFICE the clerk called to confirm if it was legit.
ritrebor
-
I sell a lot on craigslist and ebay and get a lot of request like this.
Most of the times they are scammers because they are too stupid to notice that they are responding to my different ads.
If they offer you extra money for what you are selling its a scammer.
As far as paypal goes, they can reverse the charge back to you within 20 days if the buyer says there is a problem.
Ebay has some protection with feedback but if you have a problem it can go both ways.
Best scenario is to have them send you ONLY a USPS money order for the exact amount, and you only ship after you have cashed it.
ritrebor
-
I have a Champiom 3 row aluminum radiator and replaced the fans that came with it with a pair of Spal 12" curved puller fans and it made a difference in cooling my blown Chevy.
It stays around 180 degrees in stop and go traffic.
I have a 280z, so when I bought the radiator they didn't have a shroud for it. So I made my own.
The Spal fans holes needed to be relocated and the fans were a little wider then the champion ones.
ritrebor
-
Here's mine
Just grind the bottom a little
ritrebor
-
18"
ritrebor
-
Here is what I use to plan my days.
http://www.socalcarculture.com/events.html
http://www.socalcarculture.com/cruise_nights.html
http://www.californiacarshows.org/
ritrebor
-
Here's mine
5" and 2-5/8" Autometer Phantom gauges.
ritrebor
WTB 27 Spline 4 Bolt Companion Flange Adaptors for 300ZX CLSD CV Conversion
in Parts Wanted
Posted
Still looking.
ritrebor