Search the Community
Showing results for tags 'cd00a'.
Found 3 results
-
Apologies, I included a special character in my last thread title and it corrupted the page. I can’t seem to delete it, sorry! See repost below ———————————————————— Hey all, Hope you’re good. I’ve been browsing the HybridZ forums a bit but I’ve not managed to find anything specific to the swap that I’m doing. I have a LHD 1977 280z and a 2JZ-GTE VVTi and not sure whether to mate with either a T56 Magnum F or a CD009. Please feel free to direct me to a thread which can answer what I’m outlining below! These would be my two options both brand new. Grannas T56 Magnum F kit or the Collins/Autosports/SerialNine CD009 adapter kits.. Gear T-56 F CD009 1st 2.66 3.78 2nd 1.78 2.32 3rd 1.30 1.62 4th 1.00 1.27 5th 0.80 1.00 6th 0.63 0.79 I’m based in West Sussex, UK with a LHD 1977 280Z. Lots of twisty roads and sharp turns round here... Not really too fussed about cruising and fuel economy as this will not be a daily. I’ll be looking to build my Z primarily for spirited driving and to be able to take on track occasionally. I will be doing a single turbo conversion and looking to push around 500-600 bhp max. I have to say I am leaning more towards the CD009 because of parts availability, it is also cheaper too. But will need some work done to fit in the tunnel nicely, so I’ve read. My indecision is when it comes to drivability. I’m really stuck between both CD009 and T56 Magnum F (close ratio version) and what would be better suited to what I want to build the car for based on the conditions above (I guess for the type of roads over here and the tracks we have, shorter gears are better?) I’m also quite unsure on which diff I should go for that will get the most out of whatever transmission I decide on. Do you guys have any thoughts as to what is the best pairing would be for the 2JZ in terms of transmission and diff? Can I stick with the long nose R200? Or do a SN R200 conversion, 8.8 conversion… etc. Just trying to really narrow down those options too. There are a few bits that’s I’ve read about each transmission but I haven’t managed to find technical pros and cons/justifications that is specific to my chassis and swap. I’m not sure how much of that information I can take to crossover with my build so I just would rather ask to make sure. Please let me know if you need any more info from me! Thank you very much. Raman
-
Hey all, Hope you’re good. I’ve been browsing the forums a lot but I’ve not really seen anything specific to the swap that I’m doing. I have a 280z and a 2JZ-GTE VVTi and not sure whether to mate with either a T56 Magnum F or a CD009. Please feel free to direct me to a thread which can answer what I’m outlining below! These would be my two options both brand new. Either Grannas T56 MF kit or the Collins/Autosports CD0009 adapter kits.. I’m based in the UK with a LHD 1977 280Z. We don’t really have any long stretched roads in the area that I live in - lots of twisty roads and sharp turns let’s say. Not really too fussed about cruising and fuel economy as this will not be a daily. I’ll be looking to build this primarily for street and to be able to take on track occasionally. I will be doing a single turbo conversion and looking to push around 500-600bhp max. I’m really stuck between both CD009 and T56 MF and what would be better suited to what I want to build the car for based on the conditions above (I guess for the type of roads and possibly track, shorter gears are better?) I’m also quite unsure on which diff I should go for that will make the most out of whatever transmission I decide on. Do you guys have any thoughts as to what is the best pairing would be for the 2JZ in terms of transmission and diff? Can I stick with the long nose R200? Or do a SN R200 conversion, 8.8 conversion… etc. There are a few bits that’s I’ve read about general pros and cons on another forum but haven’t managed to find technical pros and cons/justifications that is specific to my chassis and swap. I’m not sure how much of that information I can take to crossover with my build so I just would rather ask to make sure. I’m sure I will gain some insight here from you knowledgeable people! Please let me know if you need any more info from me! Thank you very much. SS -
Hello Everyone, I bought a 1971 Datsun 240z, about 2 years ago as my first project car. The more I started to dig into the car, the more I wanted to repair and improve it. Initially I was just planning on getting it running and using it while slowly upgrading and repairing it. I ended up tearing it down to the bare chassis, mounting it on a rotisserie and media blasting it. After I media blasted it, I decided to replace the floors and upgrade the frame rails with baddog frame rails. I sat down and thought about what I wanted the car to be and I came up with a ton of ideas, but ended up narrowing it down into one vision. The vision is this(nicknamed ProjectWhiteNoiseZ): My vision is inspired by modern Nissan Nismo styling, but it will be powered by a 2JZ-GTE with a cd009 transmission. I have gone through every part and media blasted and powder coated it or upgraded it with something better. Doing all of this, inspired my brother to buy a crashed 2008 Mustang GT and the current plan is to complete our cars by August/September '18. I live in Colorado and he lives in Pennsylvania, so I'll be road tripping the 240z 1700miles each way when complete to meet him at a track in Pennsylvania and race. If you're interested to see the work and follow our journey to complete our cars over the next few months, we have a YouTube channel, Facebook, and Instagram where we're documenting our builds. Any comments on suggestions for YouTube video improvements are appreciated. We will answer any questions you have. YouTube: https://www.youtube.com/channel/UCJt7v6VEHBqNPweO_cZ1guw PBB Instagram: https://www.instagram.com/projectbuildbrothers/ PWNZ Instagram: https://www.instagram.com/projectwhitenoisez/ Facebook: https://www.facebook.com/ProjectBuildBrothers/
