Search the Community
Showing results for tags 'msa'.
Found 6 results
-
So I purchased these rear brackets from MSA, I installed everything they said to use , 85’ maxima calipers/pads(rear) , 82’ 280zx rotors(rear). It all mounts up fine, but the pads are only using about half, they don’t seem to fit all the all the way down using up all the rotor surface?? Has anyone else experienced this issue?
-
I need some help. I purchased a Skillard s30 splitter for type 1 air dam and can't seem to install it. Here's my combo: 73 240z MSA urethane air dam - http://www.thezstore.com/page/TZS/PROD/classic02a01b/50-1411 Skilard Splitter - https://skillard.com/products/240z-260z-280z-front-lip-splitter the problem? The bolts that should go into the core support aren't the right size The sway bar is in the way The biggest problem, the splitter wont even mount up flush onto the core support, its off by many inches The air dam appears to be way lower that those of the pictures I've seen, so when i pull up the splutter to the bottom of the air dam, it doesn't come up to the core support to allow it to mount up. One thing I know will get in my way - the previous owner hacked in some radiator supports that are lower than the stock core support - so I'll have to make some adjustment there. Does anyone have pictures of the core support and the mounting holes I should be using? Does this air dam even work with the splitter? Did i completely F it up by buying two incompatible parts? I'll try and take some pictures but without more hands it'll be hard to show the gap... Helps!!! -
Hi, I'm looking for a used msa victory or retro spec downforce spoiler for my 280z. Fiberglass is acceptable. Looking at all tall spoilers but not the whale tail style. If you have one you are interested in letting go please PM me or comment below. Thank you
-
Hey guys, I'm trying to decide on wheels (hardest decision of my life!) and have scoured the wheels pics thread and found some good ideas there. One rim that I think I like is the Konig Five Star in a 16x7 but I can't find any pics of this on a Z. It's one of the MSA offerings, so I'm sure someone here has bought them. Could someone share some pics of the Five Stars on their car please? Here's a link to what I'm talking about: http://www.thezstore.com/page/TZS/PROD/classic01a/25-1130 Thanks, Will
-
I have a new MSA Type 1 Air dam Non ducted Fiberglass for 1974-1978 S30 models: New in box, picked up with a parts lot that I bought locally. Never bolted up, just taken out to inspect and then it was immediately put back in packaging. Want to trade for EITHER: MSA Type 1 1970/1974 (Ducted or non) - Straight trade, assuming similar condition OR Kaminari 1970/1974 - Straight trade, or extra $$$ on my part depending on condition PM if interested or if you need more information, Thanks, -Marcus -
Does anyone have good pictures of MSA Classic and/or Type 1 airdam? I've been wondering around the interwebz and searches but can't seem to come across good ones... Also it doesnt necessary have to be MSA ones, as long as the airdam can flow with the body on its own without side skirts and still in production. thanks.
