Search the Community
Showing results for tags 'urethane'.
Found 4 results
-
Do you guys know what type of original factory paint (primer and topcoat) went on the 240z? Was it a hardened acrylic enamel or lacquer? I'm going to shoot a 2-part epoxy first and then bc/cc paint. I'm debating on whether or not I should take the car all the way down to metal or paint over some of the OEM primer and want to ensure paint compatibility.
-
hey guys, I am in the process of pulling apart all my lower control arms, steering linkage, rear diff and moustache bar.. I am running a 1JZ with 340whp, an eibach upgrade springs with kyb shocks, I need to replace all my bushings but am kind of stuck as to which way to go.... Please bear in mind I want this as a daily driver with some track days. I don't want my car to rattle, sqeak and feel its vibrating all the time yet I don't want it to be super sloppy. Has anyone done a hybrid bushing replacement? Like some rubber and some poly? I would really appreciate some feedba -
Hello! I'm new to the "Z-Community" but what I can say so far is that it's GREAT! The enthusiasm and support so far has been fantastic. I recently purchased 1974 260Z with 56,000 miles on it. The car sat, covered on a car-port for nearly 30 years. I have a four phase plan for the car. Phase 1: brakes and Suspension Phase 2: drive train Phase 3: Engine upgrade phase 4: Body and Paint. I look forward to sharing the build with the community and drawing on the experience that is available. I hope that as my project progresses I can "pay it forward" to those that follow. B
-
So I have a really loud and awful sounding squeaking noise coming from my rear suspension. it is happening only when I either go over a large bump, or I accelerate. It is BY FAR worse when accelerating, its almost constant squeaking/metal on metal? screeching sound. I'm having a lot of trouble trying to narrow down what could be causing it because I recently replaced all my bushings with urethane bushings, and replaced the struts. I have tried spraying my bushings with silicone spray, but that doesn't really help. I have tried having a passenger crawl back there and see if t
